Thread (25 messages) flat view 25 messages, 6 authors, 2017-07-07
STALE3368d

Revision v1 of 7 in this series.

Revisions (7)
  1. v1 current
  2. v1 [diff vs current]
  3. v1 [diff vs current]
  4. v1 [diff vs current]
  5. v1 [diff vs current]
  6. v1 [diff vs current]
  7. v1 [diff vs current]

[PATCH 0/8] io-pgtable lock removal

From: Ray Jui <hidden>
Date: 2017-06-15 00:40:30
Also in: linux-iommu

Hi Robin,

I have applied this patch series on top of v4.12-rc4, and ran various
Ethernet and NVMf target throughput tests on it.

To give you some background of my setup:

The system is a ARMv8 based system with 8 cores. It has various PCIe
root complexes that can be used to connect to PCIe endpoint devices
including NIC cards and NVMe SSDs.

I'm particularly interested in the performance of the PCIe root complex
that connects to the NIC card, and during my test, IOMMU is
enabled/disabled against that particular PCIe root complex. The root
complexes connected to NVMe SSDs remain unchanged (i.e., without IOMMU).

For the Ethernet throughput out of 50G link:

Note during the multiple TCP session test, each session will be spread
to different CPU cores for optimized performance

Without IOMMU:

TX TCP x1 - 29.7 Gbps
TX TCP x4 - 30.5 Gbps
TX TCP x8 - 28 Gbps

RX TCP x1 - 15 Gbps
RX TCP x4 - 33.7 Gbps
RX TCP x8 - 36 Gbps

With IOMMU, but without your latest patch:

TX TCP x1 - 15.2 Gbps
TX TCP x4 - 14.3 Gbps
TX TCP x8 - 13 Gbps

RX TCP x1 - 7.88 Gbps
RX TCP x4 - 13.2 Gbps
RX TCP x8 - 12.6 Gbps

With IOMMU and your latest patch:

TX TCP x1 - 21.4 Gbps
TX TCP x4 - 30.5 Gbps
TX TCP x8 - 21.3 Gbps

RX TCP x1 - 7.7 Gbps
RX TCP x4 - 20.1 Gbps
RX TCP x8 - 27.1 Gbps

With the NVMf target test with 4 SSDs, fio based test, random read, 4k,
8 jobs:

Without IOMMU:

IOPS = 1080K

With IOMMU, but without your latest patch:

IOPS = 520K

With IOMMU and your latest patch:

IOPS = 500K ~ 850K (a lot of variation observed during the same test run)

As you can see, performance has improved significantly with this patch
series! That is very impressive!

However, it is still off, compared to the test runs without the IOMMU.
I'm wondering if more improvement is expected.

In addition, a much larger throughput variation is observed in the tests
with these latest patches, when multiple CPUs are involved. I'm
wondering if that is caused by some remaining lock in the driver?

Also, in a few occasions, I observed the following message during the
test, when multiple cores are involved:

arm-smmu 64000000.mmu: TLB sync timed out -- SMMU may be deadlocked

Thanks,

Ray

On 6/9/17 12:28 PM, Nate Watterson wrote:
Hi Robin,

On 6/8/2017 7:51 AM, Robin Murphy wrote:
quoted
Hi all,

Here's the cleaned up nominally-final version of the patches everybody's
keen to see. #1 is just a non-critical thing-I-spotted-in-passing fix,
#2-#4 do some preparatory work (and bid farewell to everyone's least
favourite bit of code, hooray!), and #5-#8 do the dirty deed itself.

The branch I've previously shared has been updated too:

   git://linux-arm.org/linux-rm  iommu/pgtable

All feedback welcome, as I'd really like to land this for 4.13.
I tested the series on a QDF2400 development platform and see notable
performance improvements particularly in workloads that make concurrent
accesses to a single iommu_domain.
quoted
Robin.


Robin Murphy (8):
   iommu/io-pgtable-arm-v7s: Check table PTEs more precisely
   iommu/io-pgtable-arm: Improve split_blk_unmap
   iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap
   iommu/io-pgtable: Introduce explicit coherency
   iommu/io-pgtable-arm: Support lockless operation
   iommu/io-pgtable-arm-v7s: Support lockless operation
   iommu/arm-smmu: Remove io-pgtable spinlock
   iommu/arm-smmu-v3: Remove io-pgtable spinlock

  drivers/iommu/arm-smmu-v3.c        |  36 ++-----
  drivers/iommu/arm-smmu.c           |  48 ++++------
  drivers/iommu/io-pgtable-arm-v7s.c | 173
+++++++++++++++++++++------------
  drivers/iommu/io-pgtable-arm.c     | 190
++++++++++++++++++++++++-------------
  drivers/iommu/io-pgtable.h         |   6 ++
  5 files changed, 268 insertions(+), 185 deletions(-)
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help