[PATCH 9/9] arm64: marvell: dts: add xmdio nodes for 7k/8k
From: Antoine Tenart <hidden>
Date: 2017-06-07 08:38:10
Also in:
netdev
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
Add the description of the xMDIO bus for the Marvell Armada 7k and Marvell Armada 8k; for both CP110 slave and master. This bus is found on Marvell Ethernet controllers and provides an interface with the xMDIO bus. Signed-off-by: Antoine Tenart <redacted> --- arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 7 +++++++ arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 7 +++++++ 2 files changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 037ed30d75a7..95953743455e 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi@@ -98,6 +98,13 @@ clocks = <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>; }; + cpm_xmdio: mdio at 12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,xmdio"; + reg = <0x12a600 0x10>; + }; + cpm_icu: interrupt-controller at 1e0000 { compatible = "marvell,cp110-icu"; reg = <0x1e0000 0x10>;
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 2a99ff8fca2a..594356243ddb 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi@@ -103,6 +103,13 @@ clocks = <&cps_syscon0 1 9>, <&cps_syscon0 1 5>; }; + cps_xmdio: mdio at 12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,xmdio"; + reg = <0x12a600 0x10>; + }; + cps_icu: interrupt-controller at 1e0000 { compatible = "marvell,cp110-icu"; reg = <0x1e0000 0x10>;
--
2.9.4