On 06/01/2017 03:47 PM, Neil Armstrong wrote:

On 05/30/2017 04:23 PM, Russell King wrote:

quoted

Add a CEC driver for the dw-hdmi hardware.

Signed-off-by: Russell King <redacted>
---
  drivers/gpu/drm/bridge/synopsys/Kconfig       |   8 +
  drivers/gpu/drm/bridge/synopsys/Makefile      |   1 +
  drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c | 320 ++++++++++++++++++++++++++
  drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.h |  19 ++
  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c     |  40 +++-
  5 files changed, 387 insertions(+), 1 deletion(-)
  create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c
  create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.h

diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
index 40d2827a6d19..bd30a0a07272 100644
--- a/drivers/gpu/drm/bridge/synopsys/Kconfig
+++ b/drivers/gpu/drm/bridge/synopsys/Kconfig

@@ -21,3 +21,11 @@ config DRM_DW_HDMI_I2S_AUDIO
  	help
  	  Support the I2S Audio interface which is part of the Synopsys
  	  Designware HDMI block.
+
+config DRM_DW_HDMI_CEC
+	tristate "Synopsis Designware CEC interface"
+	depends on DRM_DW_HDMI && MEDIA_CEC_SUPPORT
+	select MEDIA_CEC_NOTIFIER
+	help
+	  Support the CE interface which is part of the Synopsis
+	  Designware HDMI block.

diff --git a/drivers/gpu/drm/bridge/synopsys/Makefile b/drivers/gpu/drm/bridge/synopsys/Makefile
index 17aa7a65b57e..6fe415903668 100644
--- a/drivers/gpu/drm/bridge/synopsys/Makefile
+++ b/drivers/gpu/drm/bridge/synopsys/Makefile

@@ -3,3 +3,4 @@
  obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
  obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
  obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o
+obj-$(CONFIG_DRM_DW_HDMI_CEC) += dw-hdmi-cec.o

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c
new file mode 100644
index 000000000000..761ef5ae687d
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c

@@ -0,0 +1,320 @@
+/*
+ * Designware HDMI CEC driver
+ *
+ * Copyright (C) 2015-2017 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include <drm/drm_edid.h>
+
+#include <media/cec.h>
+#include <media/cec-notifier.h>
+
+#include "dw-hdmi-cec.h"
+
+enum {
+	HDMI_IH_CEC_STAT0	= 0x0106,
+	HDMI_IH_MUTE_CEC_STAT0	= 0x0186,
+
+	HDMI_CEC_CTRL		= 0x7d00,
+	CEC_CTRL_START		= BIT(0),
+	CEC_CTRL_NORMAL		= 1 << 1,
+
+	HDMI_CEC_STAT		= 0x7d01,
+	CEC_STAT_DONE		= BIT(0),
+	CEC_STAT_EOM		= BIT(1),
+	CEC_STAT_NACK		= BIT(2),
+	CEC_STAT_ARBLOST	= BIT(3),
+	CEC_STAT_ERROR_INIT	= BIT(4),
+	CEC_STAT_ERROR_FOLL	= BIT(5),
+	CEC_STAT_WAKEUP		= BIT(6),

I hadn't realized until Jose Abreu's latest reply, but you need to check the
ARBLOST status and set the TX state to CEC_TX_STATUS_ARB_LOST.

I think CEC_STAT_ERROR_FOLL might equal CEC_TX_STATUS_LOW_DRIVE, but without
documentation I can't be sure.

My experience is that this low drive condition tends to be poorly reported by
hardware. Either that or poorly documented. This is why I added a
CEC_TX_STATUS_ERROR status as a catch-all error status when it is unclear from
the hardware/documentation what error occurred.

Jose, do you know which status bit is used to report a follower pulling the
CEC line low for a long time (approx. 3.6 ms) to signal a CEC error?

Regards,

	Hans