[PATCH 0/6] Init Clock frequences for accelerators

* Tero Kristo [off-list ref] [170612 01:36]:

On 12/06/17 10:36, Tony Lindgren wrote:

quoted

* Suman Anna [off-list ref] [170607 14:31]:

quoted

Hi Tony,

The following series configures the initial frequencies for the required
DPLLs and corresponding output divider clocks used by various remoteproc
accelerators (DSP, IVAHD) on OMAP4, OMAP5 & DRA7xx/AM57xx SoCs and the
GPU on DRA7xx/AM57xx SoCs. All these devices require Adaptive Voltage
Scaling (AVS) to be programmed at all OPPs at boot time, which is
programmed in the bootloader. Furthermore, DVFS is not supported on
these domains implying a one-time OPP clock frequency setup.

Tero, care to comment or ack this series?

These have been in use in TI releases for quite a while already, and look
fine, thus:

Acked-by: Tero Kristo <redacted>

(Didn't quite think my ack was needed for them so didn't respond earlier,
sorry.)

OK thanks applying all into omap-for-v4.13/dt.

Regards,

Tony