[PATCH] dts: ipq4019: Move xo and timer nodes to SoC dtsi
From: Stephen Boyd <hidden>
Date: 2017-06-30 17:17:57
Also in:
linux-arm-msm, linux-devicetree, lkml
On 06/30, Varadarajan Narayanan wrote:
quoted hunk ↗ jump to hunk
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi index b9457dd..b74c113 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi@@ -20,26 +20,7 @@ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; compatible = "qcom,ipq4019"; - clocks { - xo: xo { - compatible = "fixed-clock"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; - }; - soc { - - - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 2 0xf08>, - <1 3 0xf08>, - <1 4 0xf08>, - <1 1 0xf08>; - clock-frequency = <48000000>; - }; - pinctrl at 0x01000000 {
This should be pinctrl at 1000000 { and fixed in another patch.
quoted hunk ↗ jump to hunk
serial_pins: serial_pinmux { mux {diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index b7a24af..e8ab1e1 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi@@ -96,6 +96,11 @@ clock-frequency = <32768>; #clock-cells = <0>; }; + xo: xo {
Please add a newline so it isn't right next to the previous node.
quoted hunk ↗ jump to hunk
+ compatible = "fixed-clock"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; }; soc {@@ -104,6 +109,15 @@ ranges; compatible = "simple-bus"; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <48000000>; + };
This should be outside of the soc node.
+
intc: interrupt-controller at b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;-- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project