On Fri, Jun 23, 2017 at 11:00:55AM +0200, Quentin Schulz wrote:

From: Nicolas Ferre <redacted>

This new clock driver set allows to have a fractional divided clock that
would generate a precise clock particularly suitable for audio
applications.

The main audio pll clock has two children clocks: one that is connected
to the PMC, the other that can directly drive a pad. As these two routes
have different enable bits and different dividers and divider formula,
they are handled by two different drivers. Each of them could modify the
rate of the main audio pll parent.
The main audio pll clock can output 620MHz to 700MHz.

Signed-off-by: Nicolas Ferre <redacted>
Signed-off-by: Quentin Schulz <redacted>
---
 .../devicetree/bindings/clock/at91-clock.txt       |  10 +

It would be nice to see at91 to transition away from a node per clock to 
just clock controller nodes. In any case:

Acked-by: Rob Herring <robh@kernel.org>

 arch/arm/mach-at91/Kconfig                         |   4 +
 drivers/clk/at91/Makefile                          |   2 +
 drivers/clk/at91/clk-audio-pll-pad.c               | 204 ++++++++++++++++++
 drivers/clk/at91/clk-audio-pll-pmc.c               | 175 +++++++++++++++
 drivers/clk/at91/clk-audio-pll.c                   | 237 +++++++++++++++++++++
 include/linux/clk/at91_pmc.h                       |  25 +++
 sound/soc/atmel/atmel-classd.c                     |  20 +-
 8 files changed, 658 insertions(+), 19 deletions(-)
 create mode 100644 drivers/clk/at91/clk-audio-pll-pad.c
 create mode 100644 drivers/clk/at91/clk-audio-pll-pmc.c
 create mode 100644 drivers/clk/at91/clk-audio-pll.c