[PATCH v2 7/8] dt-bindings: iio: Add STM32 LPTimer quadrature encoder and counter
From: Fabrice Gasnier <hidden>
Date: 2017-06-21 14:36:07
Also in:
linux-devicetree, linux-iio, linux-pwm, lkml
Subsystem:
iio subsystem and drivers, open firmware and flattened device tree bindings, stm32 timer/lptimer drivers, the rest · Maintainers:
Jonathan Cameron, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Fabrice Gasnier, Linus Torvalds
Add documentation for STMicroelectronics STM32 Low-Power Timer quadrature encoder and counter binding. Signed-off-by: Fabrice Gasnier <redacted> --- Changes in v2: - s/Low Power/Low-Power - remove leading 0x in example (parent node) - improve properties descriptions --- .../bindings/iio/counter/stm32-lptimer-cnt.txt | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt
diff --git a/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt b/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt
new file mode 100644
index 0000000..b9fd014
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt@@ -0,0 +1,27 @@ +STMicroelectronics STM32 Low-Power Timer quadrature encoder and counter + +STM32 Low-Power Timer provides several counter modes. It can be used as: +- quadrature encoder to detect angular position and direction of rotary + elements, from IN1 and IN2 input signals. +- simple counter from IN1 input signal. + +Must be a sub-node of an STM32 Low-Power Timer device tree node. +See ../mfd/stm32-lptimer.txt for details about the parent node. + +Required properties: +- compatible: Must be "st,stm32-lptimer-counter". +- pinctrl-names: Set to "default". +- pinctrl-0: List of phandles pointing to pin configuration nodes, + to set IN1/IN2 pins in mode of operation for Low-Power + Timer input on external pin. + +Example: + lptimer1: lptimer at 40002400 { + compatible = "st,stm32-lptimer"; + ... + counter { + compatible = "st,stm32-lptimer-counter"; + pinctrl-names = "default"; + pinctrl-0 = <&lptim1_in_pins>; + }; + };
--
1.9.1