[PATCH v4 1/4] ARM: dts: at91: sama5d2_xplained: enable ADTRG pin
From: Eugen Hristev <hidden>
Date: 2017-06-09 07:09:29
Also in:
linux-devicetree, linux-iio, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Enable pinctrl for ADTRG pin (PD31) for ADC hardware trigger support. Signed-off-by: Eugen Hristev <redacted> --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 0bef9e0..04754b1 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts@@ -303,7 +303,7 @@ vddana-supply = <&vdd_3v3_lp_reg>; vref-supply = <&vdd_3v3_lp_reg>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc_default>; + pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; status = "okay"; };
@@ -322,6 +322,20 @@ bias-disable; }; + /* + * The ADTRG pin can work on any edge type. + * In here it's being pulled up, so need to + * connect it to ground to get an edge e.g. + * Trigger can be configured on falling, rise + * or any edge, and the pull-up can be changed + * to pull-down or left floating according to + * needs. + */ + pinctrl_adtrg_default: adtrg_default { + pinmux = <PIN_PD31__ADTRG>; + bias-pull-up; + }; + pinctrl_charger_chglev: charger_chglev { pinmux = <PIN_PA12__GPIO>; bias-disable;
--
2.7.4