The AR100 clock in the PRCM has parents, one of which is pll-periph from
the main CCU.

Add it to the list of required clocks for the PRCM CCU.

Signed-off-by: Chen-Yu Tsai <redacted>
---
 Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt

b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index
095a5807d874..966345972d83 100644

--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt

@@ -25,7 +25,8 @@ Required properties :
 - #clock-cells : must contain 1
 - #reset-cells : must contain 1

-For the PRCM CCUs on A83T/H3/A64, one more clock is needed:
+For the PRCM CCUs on A83T/H3/A64, two more clock is needed:

+- "pll-periph": the SoC's peripheral PLL from the main CCU
 - "iosc": the SoC's internal frequency oscillator

 Example for generic CCU:

@@ -42,8 +43,8 @@ Example for PRCM CCU:
 r_ccu: clock at 01f01400 {
 	compatible = "allwinner,sun50i-a64-r-ccu";
 	reg = <0x01f01400 0x100>;
-	clocks = <&osc24M>, <&osc32k>, <&iosc>;
-	clock-names = "hosc", "losc", "iosc";
+	clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>;
+	clock-names = "hosc", "losc", "iosc", "pll-periph";
 	#clock-cells = <1>;
 	#reset-cells = <1>;
 };
--

2.11.0

--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group. To unsubscribe from this group and stop receiving
emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
For more options, visit https://groups.google.com/d/optout.