[PATCH] ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes

Hi Christopher,

On Tue, May 30, 2017 at 5:16 PM,  [off-list ref] wrote:

+       awnh387_pwrseq: pwrseq {
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_pwrseq>;
+               compatible = "mmc-pwrseq-sd8787";
+               powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+               reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;

At least in the AW-NH387 datasheet I found it says:

RESETn: Reset(active low at least 10ns)

Please double check the polarity in device tree.