[PATCH 2/2] ARM: dts: orange-pi-zero: enable SPI NOR

quoted

For more information see:
- http://linux-sunxi.org/Orange_Pi_Zero#SPI_NOR_flash

Same remark here than on the first patch

Ok, I will provide a more detailed commit message
w/o external references.

quoted

+&spi0 {
+	status = "okay";
+
+	flash at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		reg = <0>;
+		spi-max-frequency = <40000000>;

How do the other OPi Zero that doesn't have that SPI flash behave?

Hmmm. Good point. According to linux-sunxi.org docs SPI NOR flash
was optional in the first production batch in Dec 2016. In later
batches flash chip was pre-populated. However there are should
be quite a few boards around which do not have flash.

Does it make sense to set status to 'disabled' by default adding
appropriate comment in the commit message ?

quoted

+
+		partition at 00000000 {
+			reg = <0x00000000 0x200000>;	/* 2Mb */
+		};

There's no need to create a first partition, this needs to be
user-defined.

Ok, than it probably makes sense to drop it from dts. User-defined
list of partitions can be passed via kernel command line.

Thanks,
Sergey