On Sat, May 06, 2017 at 02:10:50PM +0200, Linus Walleij wrote:

This adds device tree bindings for the Faraday Technology
FTIDE010 found in the Storlink/Storm/Cortina Systems Gemini SoC.

I am not 100% sure that this part if from Faraday Technology but

s/if/is/

a lot points in that direction:

- A later IDE interface called FTIDE020 exist and share some
  properties.

- The SATA bridge has the same Built In Self Test (BIST) that the
  Faraday FTSATA100 seems to have, and it has version number 0100
  in the device ID register, so this is very likely a FTSATA100
  bundled with the FTIDE010.

Cc: devicetree at vger.kernel.org
Cc: John Feng-Hsin Chiang <redacted>
Cc: Greentime Hu <redacted>
Signed-off-by: Linus Walleij <redacted>
---
Greentime: I think this may be interesting to you since the
FTIDE020 will need the same bindings so we can probably
just reuse them and maybe make the parser a library if you
want to upstream the FTIDE020.

Faraday people: I do not have it from a source that this
hardware is really FTIDE010 but I would be VERY surprised
if it is not. U-Boot has an FTIDE020 IDE controller
synthesized in the Andestech platform, and it has a similar
yet different register layout, featuring similar timing
set-ups:
http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/block/ftide020.h
http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/block/ftide020.c
---
 .../devicetree/bindings/ata/faraday,ftide010.txt   | 63 ++++++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ata/faraday,ftide010.txt

Acked-by: Rob Herring <robh@kernel.org>