[PATCH v6 07/21] arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
From: clabbe.montjoie@gmail.com (Corentin Labbe)
Date: 2017-05-31 07:27:14
Also in:
linux-devicetree, lkml, netdev
Subsystem:
the rest · Maintainer:
Linus Torvalds
The dwmac-sun8i is an ethernet MAC hardware that support 10/100/1000 speed. This patch enable the dwmac-sun8i on Allwinner H3/H5 SoC Device-tree. SoC H3/H5 have an internal PHY, so optionals syscon and ephy are set. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 3a28be5ab641..9e4a496f3cca 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi@@ -285,6 +285,14 @@ interrupt-controller; #interrupt-cells = <3>; + emac_rgmii_pins: emac0 { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD7", "PD8", "PD9", "PD10", + "PD12", "PD13", "PD15", "PD16", "PD17"; + function = "emac"; + drive-strength = <40>; + }; + i2c0_pins: i2c0 { pins = "PA11", "PA12"; function = "i2c0";
@@ -381,6 +389,32 @@ clocks = <&osc24M>; }; + emac: ethernet at 1c30000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c30000 0x104>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy at 1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + }; + spi0: spi at 01c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>;
--
2.13.0