[PATCH v1 1/5] ARM: imx6q: provide documentation for new fsl, pmic_stby_poweroff property
From: o.rempel@pengutronix.de (Oleksij Rempel)
Date: 2017-05-29 17:09:59
Also in:
linux-clk, linux-devicetree, lkml
Subsystem:
common clk framework, nxp i.mx clock drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Abel Vesa, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: kernel at pengutronix.de Cc: linux-arm-kernel at lists.infradead.org Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <redacted> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-clk at vger.kernel.org Cc: devicetree at vger.kernel.org Cc: linux-kernel at vger.kernel.org --- Documentation/devicetree/bindings/clock/imx6q-clock.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 9252912a5b0e..214cb5f461c7 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt@@ -6,6 +6,10 @@ Required properties: - interrupts: Should contain CCM interrupt - #clock-cells: Should be <1> +Optional properties: +- fsl,pmic_stby_poweroff: Configure CCM to assert PMIC_STBY_REQ signal + on power off. + The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h for the full list of i.MX6 Quad and DualLite clock IDs.
--
2.11.0