Thread (10 messages) 10 messages, 3 authors, 2017-09-05

[PATCH v3 4/5] ARM64: dts: Add Realtek RTD1295 and Zidoo X9S

flat view

From: robh+dt@kernel.org (Rob Herring)
Date: 2017-05-24 13:19:14
Also in: linux-devicetree, lkml

On Sat, May 13, 2017 at 9:24 PM, Andreas F?rber [off-list ref] wrote:
Add initial device trees for the RTD1295 SoC and the Zidoo X9S TV box.

The CPUs lack the enable-method property because the vendor device tree
uses a custom "rtk-spin-table" method and "psci" did not appear to work.

The UARTs lack the interrupts properties because the vendor device tree
connects them to a custom interrupt controller. earlycon works without.

A list of memory reservations is adopted from v1.2.11 vendor device tree:
0x02200000 can be used for an initrd, 0x01b00000 is audio-related;
ion-related 0x02600000, 0x02c00000 and 0x11000000 are left out;
0x10000000 is used for sharing the U-Boot environment; others remain
to be investigated.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
 v2 -> v3:
 * Adopted SPDX-License-Identifier (Rob)
 * Added ranges for /soc node (Rob)
 * Changed #address-cells and #size-cells to 1 (Rob)

 v1 -> v2:
 * Dropped 0x0000000010000000 /memreserve/

 arch/arm64/boot/dts/Makefile                      |   1 +
 arch/arm64/boot/dts/realtek/Makefile              |   5 +
 arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts |  42 +++++++
 arch/arm64/boot/dts/realtek/rtd1295.dtsi          | 131 ++++++++++++++++++++++
 4 files changed, 179 insertions(+)
 create mode 100644 arch/arm64/boot/dts/realtek/Makefile
 create mode 100644 arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts
 create mode 100644 arch/arm64/boot/dts/realtek/rtd1295.dtsi
Reviewed-by: Rob Herring <robh@kernel.org>
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help