[PATCH 00/13] Linksys WRT3200ACM (Rango) support

On Tue, 23 May 2017 17:22:05 +0200
Gregory CLEMENT [off-list ref] wrote:

Hi Ralph,
 
 On dim., mai 21 2017, Ralph Sennhauser [off-list ref]
wrote:

quoted

Hi everyone

This series adds support for the latest model in Linksys WRT AC
series of routers. The WRT3200ACM was released in October 2016 and
the code name is Rango.

As it comes with a flash chip twice as big the dts Imre Kaloz has
written for OpenWrt isn't based on armada-385-linksys.dtsi to avoid
conflicts. Nonetheless its part of the same family, so the bigger
part of this series is dedicated to reorganize / modernize /
cleanup / somewhat future proof the armada-385-linksys.dtsi and
it's dependants so the dts for the Rango addition can use the same
dtsi.

Key differences to the earlier Armada-385 based devices in the
series is a bigger flash chip, next generation wireless modules in
the mini pcie slots as well as a Marvell SD8887. Finally the CPU is
clocked at 1866 GHz by default.

The series depends on Linux 4.12-rc1 and is targeted for 4.13.

Ralph

 

Hi Gregory,

I applied the 11 first patches on mvebu/dt. I added the
"Signed-off-by" from Imre Kaloz [off-list ref] on all of them
and the "Reviewed-by" from Andrew Lunn [off-list ref] when
approriate.

That was a lot faster than expected

I also did the following things:

quoted

Ralph Sennhauser (13):
  ARM: dts: armada-385-linksys: flatten dtsi

Just noticed the commit message has "helps helps" in it.

quoted

  ARM: dts: armada-385-linksys: label nodes  

Fixed typo pointed by Andrew

quoted

  ARM: dts: armada-385-linksys: flatten dependants  

Fixed typo pointed by Andrew

Something that I didn't change is the word "dependants", I don't know
what do you means exactly. But not being native speaker I maybe missed
something.

Dependants is the noun, tho that might be a British English thing (what
I had in school). I learned English as 4th/5th language together with
Latin, so beside being a mixture of American and British English some
custom English surfaces from time to time. :)

quoted

  ARM: dts: armada-385-linksys: drop redundant properties in
dependants ARM: dts: armada-385-linksys: bm pools by label order
  ARM: dts: armada-385-linksys: usb3 label cleanup  

I applied this one because I found Ralph explanation convincing about
not modifying the ABI

quoted

  ARM: dts: armada-385-linksys: drop leagcy DSA bindings  

Fixed typo in title and commit log

Didn't notice until you pointed it out. Thanks.

quoted

  ARM: dts: armada-385-linksys: use binary unit prefixes  

As Ralph I prefer that we use normalized unit. Especially when we use
MiB or KiB then we are sure that we use a power of 2, whereas when we
see KB we don't know if it is 1024B or 1000B.

quoted

  ARM: dts: armada-385-linksys: partition layout is board specific
  ARM: dts: armada-385-linksys: group pins in pinctrl
  ARM: dts: armada-385-linksys: fixup button node names  

quoted

  clk: mvebu: add support for 1866MHz variants  

I didn't apply this one as it must go through the clk tree and there
was also a pending question from Andrew.

And the way he formulated it he probably already knows that more is
needed. I'll investigate it.

quoted

  ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango)  

For this last one do you finally agree to use "non-removable" instead
of "broken-cd" ?

The card isn't really accessible and as such polling sort of pointless.
I prefer non-removable but left it as-is for V1.

Thanks
Ralph

PS: Also thanks for applying the reminder of the pwm-fan series.