@@ -8,6 +8,7 @@ of the EMIF IP and memory parts attached to it.
 Required properties:
 - compatible	: Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
   is the IP revision of the specific EMIF instance.
+		  For am335x should be ti,emif-am3352.
 		  For am437x should be ti,emif-am4372.
 
 - phy-type	: <u32> indicating the DDR phy type. Following are the

@@ -21,6 +22,13 @@ Required properties:
   the value shall be "emif<n>" where <n> is the number of the EMIF
   instance with base 1.
 
+Required only for "ti,emif-am3352" and "ti,emif-am4372":
+- sram			: Phandles for generic sram driver nodes,
+  first should be type 'protect-exec' for the driver to use to copy
+  and run PM functions, second should be regular pool to be used for
+  data region for code. See Documentation/devicetree/bindings/sram/sram.txt
+  for more details.
+
 Optional properties:
 - cs1-used		: Have this property if CS1 of this EMIF
   instance has a memory part attached to it. If there is a memory

@@ -42,7 +50,7 @@ Optional properties:
 - hw-caps-temp-alert	: Have this property if the controller
   has capability for generating SDRAM temperature alerts
 
-Example:
+-Examples:
 
 emif1: emif at 0x4c000000 {
 	compatible	= "ti,emif-4d";

@@ -54,3 +62,11 @@ emif1: emif at 0x4c000000 {
 	hw-caps-ll-interface;
 	hw-caps-temp-alert;
 };
+
+/* From am33xx.dtsi */
+emif: emif at 4c000000 {
+        compatible = "ti,emif-am3352";
+        reg =   <0x4C000000 0x1000>;
+        sram = <&pm_sram_code
+                &pm_sram_data>;
+};