[PATCH v5 10/10] arm64: allwinner: a64: enable Wi-Fi for Pine64
From: icenowy@aosc.io (Icenowy Zheng)
Date: 2017-04-26 15:25:33
Also in:
linux-devicetree, lkml
Subsystem:
arm/allwinner sunxi soc support, the rest · Maintainers:
Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Linus Torvalds
The Wi-Fi module of Pine64 is powered via DLDO4 and ELDO1 (the latter one provides I/O voltage). Add device node for it. Although the Wi-Fi module is an external module which should be inserted to a header, according to my personal talk with TL Lim, he does not want this header to be used as GPIO (so it's with 2.0mm pitch, not 2.54mm as other GPIO headers). Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index abc1879e91f2..2e4f44800162 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts@@ -64,6 +64,11 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; }; &ehci1 {
@@ -91,6 +96,17 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dldo4>; + vqmmc-supply = <®_eldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + bus-width = <4>; + status = "okay"; +}; + &ohci1 { status = "okay"; };
--
2.12.2