[PATCH v2 2/7] Documentation: dt: Remove bindings for STM32 pinctrl
From: Alexandre TORGUE <hidden>
Date: 2017-04-07 12:44:26
Also in:
linux-devicetree, linux-gpio, lkml
Subsystem:
open firmware and flattened device tree bindings, pin control subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Linus Torvalds
Remove "ngpios" bindings definition as it is no more used in stm32 pinctrl driver. Signed-off-by: Alexandre TORGUE <redacted>
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
index eac20aa..e4cda3d 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt@@ -38,8 +38,6 @@ Optional properties: - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node which includes IRQ mux selection register, and the offset of the IRQ mux selection register. - - ngpios: Number of gpios in a bank (to use if bank gpio numbers is less - than 16). - gpio-ranges: Define a dedicated mapping between a pin-controller and a gpio controller. Format is <&phandle a b c> with: -(phandle): phandle of pin-controller.
--
1.9.1