[PATCH v3 08/19] KVM: arm64: ITS: Interpret MAPD Size field and check related errors
From: eric.auger@redhat.com (Auger Eric)
Date: 2017-03-21 17:40:30
Also in:
kvm, kvmarm
Hi Andre, On 17/03/2017 16:03, Andre Przywara wrote:
Hi, On 06/03/17 11:34, Eric Auger wrote:quoted
Up to now the MAPD's ITT size field has been ignored. It encodes the number of eventid bit minus 1. It should be used to check the eventid when a MAPTI command is issued on a device. Let's store the nb_eventid_bits in the its_device and do the check on MAPTI. Also make sure the ITT size field does not exceed the GITS_TYPER IDBITS field. Signed-off-by: Eric Auger <eric.auger@redhat.com> --- --- include/linux/irqchip/arm-gic-v3.h | 2 ++ virt/kvm/arm/vgic/vgic-its.c | 14 +++++++++++++- 2 files changed, 15 insertions(+), 1 deletion(-)diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h index d81f10f..a7a5548 100644 --- a/include/linux/irqchip/arm-gic-v3.h +++ b/include/linux/irqchip/arm-gic-v3.h@@ -338,9 +338,11 @@ #define E_ITS_INT_UNMAPPED_INTERRUPT 0x010307 #define E_ITS_CLEAR_UNMAPPED_INTERRUPT 0x010507 #define E_ITS_MAPD_DEVICE_OOR 0x010801 +#define E_ITS_MAPD_ITTSIZE_OOR 0x010802 #define E_ITS_MAPC_PROCNUM_OOR 0x010902 #define E_ITS_MAPC_COLLECTION_OOR 0x010903 #define E_ITS_MAPTI_UNMAPPED_DEVICE 0x010a04 +#define E_ITS_MAPTI_ID_OOR 0x010a05 #define E_ITS_MAPTI_PHYSICALID_OOR 0x010a06 #define E_ITS_INV_UNMAPPED_INTERRUPT 0x010c07 #define E_ITS_INVALL_UNMAPPED_COLLECTION 0x010d09diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c index 6d84508..56bcd92 100644 --- a/virt/kvm/arm/vgic/vgic-its.c +++ b/virt/kvm/arm/vgic/vgic-its.c@@ -99,6 +99,7 @@ struct its_device { /* the head for the list of ITTEs */ struct list_head itt_head; + u32 nb_eventid_bits; u32 device_id; };@@ -177,6 +178,7 @@ static struct its_ite *find_ite(struct vgic_its *its, u32 device_id, #define GIC_LPI_OFFSET 8192 #define VITS_ESZ 8 +#define VITS_TYPER_IDBITS 0xFAlone for consistency reasons I'd use "16" here and subtract one upon encoding this into the TYPER register.
OK done
quoted
/* * Finds and returns a collection in the ITS collection table.@@ -400,7 +402,7 @@ static unsigned long vgic_mmio_read_its_typer(struct kvm *kvm, * DevBits low - as least for the time being. */ reg |= 0x0f << GITS_TYPER_DEVBITS_SHIFT; - reg |= 0x0f << GITS_TYPER_IDBITS_SHIFT; + reg |= VITS_TYPER_IDBITS << GITS_TYPER_IDBITS_SHIFT; reg |= (VITS_ESZ - 1) << GITS_TYPER_ITT_ENTRY_SIZE_SHIFT; return extract_bytes(reg, addr & 7, len);@@ -560,6 +562,7 @@ static u64 its_cmd_mask_field(u64 *its_cmd, int word, int shift, int size) #define its_cmd_get_collection(cmd) its_cmd_mask_field(cmd, 2, 0, 16) #define its_cmd_get_target_addr(cmd) its_cmd_mask_field(cmd, 2, 16, 32) #define its_cmd_get_validbit(cmd) its_cmd_mask_field(cmd, 2, 63, 1) +#define its_cmd_get_size(cmd) its_cmd_mask_field(cmd, 1, 0, 5)Can you please move this up to be in order with the other fields?
done
quoted
/* * The DISCARD command frees an Interrupt Translation Table Entry (ITTE).@@ -745,6 +748,9 @@ static int vgic_its_cmd_handle_mapi(struct kvm *kvm, struct vgic_its *its, if (!device) return E_ITS_MAPTI_UNMAPPED_DEVICE; + if (event_id >= (2 << device->nb_eventid_bits))And I'd find it less confusing to hold the actual bit size in nb_eventid_bits (and abstract from the particular encoding in TYPER). That would avoid this slightly odd (2 << ...) here, for instance.
OK I replaced nb_eventid_bits by nb_eventids which corresponds to the the max number of eventids for this device More than odd, the shift is completely wrong. Now I use BIT_ULL() as you mentioned later on. The only drawback is that when flushing the DTE I need to use ilog2 to encode the size field again.
quoted
+ return E_ITS_MAPTI_ID_OOR; + if (its_cmd_get_command(its_cmd) == GITS_CMD_MAPTI) lpi_nr = its_cmd_get_physical_id(its_cmd); else@@ -825,11 +831,15 @@ static int vgic_its_cmd_handle_mapd(struct kvm *kvm, struct vgic_its *its, { u32 device_id = its_cmd_get_deviceid(its_cmd); bool valid = its_cmd_get_validbit(its_cmd); + size_t size = its_cmd_get_size(its_cmd);If you add 1 here, you'd make clear that this is an encoding property.
done Thanks Eric
Cheers, Andre.quoted
struct its_device *device; if (!vgic_its_check_id(its, its->baser_device_table, device_id)) return E_ITS_MAPD_DEVICE_OOR; + if (valid && size > VITS_TYPER_IDBITS) + return E_ITS_MAPD_ITTSIZE_OOR; + device = find_its_device(its, device_id); /*@@ -852,6 +862,8 @@ static int vgic_its_cmd_handle_mapd(struct kvm *kvm, struct vgic_its *its, return -ENOMEM; device->device_id = device_id; + device->nb_eventid_bits = size + 1; + INIT_LIST_HEAD(&device->itt_head); list_add_tail(&device->dev_list, &its->device_list);