[PATCH 08/11] arm64: tegra: Enable current monitors on P3310
From: jonathanh@nvidia.com (Jon Hunter)
Date: 2017-03-08 11:52:58
Also in:
linux-tegra
On 23/02/17 17:30, Thierry Reding wrote:
quoted hunk ↗ jump to hunk
From: Thierry Reding <redacted> The P3310 processor module contains two current monitors that can be used to determine the current flow across various parts of the board design. Signed-off-by: Thierry Reding <redacted> --- arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index b18e166527d8..a1cb6b35314e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi@@ -56,6 +56,16 @@ i2c at 3160000 { status = "okay"; + + power-monitor at 40 { + compatible = "ti,ina3221"; + reg = <0x40>; + }; + + power-monitor at 41 { + compatible = "ti,ina3221"; + reg = <0x41>; + }; }; i2c at 3180000 {
Acked-by: Jon Hunter <jonathanh@nvidia.com> Cheers Jon -- nvpublic