Thread (10 messages) flat view 10 messages, 4 authors, 2017-03-09
STALE3444d

[PATCH v4 net-next 4/6] drivers: net: xgene-v2: Add base driver

From: f.fainelli@gmail.com (Florian Fainelli)
Date: 2017-03-08 01:22:26
Also in: netdev

On 03/07/2017 05:08 PM, Iyappan Subramanian wrote:
This patch adds,

     - probe, remove, shutdown
     - open, close and stats
     - create and delete ring
     - request and delete irq

Signed-off-by: Iyappan Subramanian <redacted>
Signed-off-by: Keyur Chudgar <redacted>
---
+	pdata->resources.phy_mode = phy_mode;
+
+	if (pdata->resources.phy_mode != PHY_INTERFACE_MODE_RGMII) {
+		dev_err(dev, "Incorrect phy-connection-type specified\n");
+		return -ENODEV;
+	}
This does not take into account all other PHY_INTERFACE_MODE_RGMII
variants, is that really intentional here?
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret <= 0) {
0 can be a valid interrupt on some platforms AFAIR, so you may want to
just check < 0.
+		dev_err(dev, "Unable to get ENET IRQ\n");
+		ret = ret ? : -ENXIO;
+		return ret;
+	}
+	pdata->resources.irq = ret;
+
+static int xge_request_irq(struct net_device *ndev)
+{
+	struct xge_pdata *pdata = netdev_priv(ndev);
+	struct device *dev = &pdata->pdev->dev;
+	int ret;
+
+	snprintf(pdata->irq_name, IRQ_ID_SIZE, "%s", ndev->name);
+
+	ret = devm_request_irq(dev, pdata->resources.irq, xge_irq,
+			       0, pdata->irq_name, pdata);
+	if (ret)
+		netdev_err(ndev, "Failed to request irq %s\n", pdata->irq_name);
The preference for network driver is to manage the request_irq() in the
ndo_open() callback and free_irq() in the ndo_close() which kind of
defeats the purpose of using devm_* functions for that purpose.

+static int xge_open(struct net_device *ndev)
+{
+	struct xge_pdata *pdata = netdev_priv(ndev);
+	int ret;
+
+	ret = xge_create_desc_rings(ndev);
+	if (ret)
+		return ret;
+
+	napi_enable(&pdata->napi);
+	ret = xge_request_irq(ndev);
+	if (ret)
+		return ret;
+
+	xge_intr_enable(pdata);
+	xge_wr_csr(pdata, DMARXCTRL, 1);
+	xge_mac_enable(pdata);
+	netif_start_queue(ndev);
+	netif_carrier_on(ndev);
Can't you use PHYLIB to get the link indication and not manage the link
state manually here? Setting netif_carrier_on() without checking the
actualy physical medium is just plain wrong/

+static void xge_timeout(struct net_device *ndev)
+{
+	struct xge_pdata *pdata = netdev_priv(ndev);
+
+	rtnl_lock();
+
+	if (netif_running(ndev)) {
Reduce indention here.
+		netif_carrier_off(ndev);
+		netif_stop_queue(ndev);
+		xge_intr_disable(pdata);
+		napi_disable(&pdata->napi);
+
+static int xge_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct net_device *ndev;
+	struct xge_pdata *pdata;
+	int ret;
+
+	ndev = alloc_etherdev(sizeof(struct xge_pdata));
sizeof(*pdata).
-- 
Florian
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help