[PATCH] arm64: tegra: Add CPU and PSCI nodes for NVIDIA Tegra210 platforms

On Tue, Mar 28, 2017 at 05:49:41PM +0100, Jon Hunter wrote:

On 28/03/17 17:23, Stephen Warren wrote:

quoted

On 03/28/2017 05:48 AM, Jon Hunter wrote:

quoted

Add the CPU and PSCI nodes for the NVIDIA Tegra210 platforms so that
all CPUs can be enabled on boot. This assumes that the PSCI firmware
has been loaded during the initial bootstrap on the device before the
kernel starts (which is typically the case for these platforms). The
PSCI firmware version is set to v0.2 which aligns with the current
shipping version for Tegra.

This seems fine, although I'd expect PSCI to be used everywhere on
Tegra, so putting this in tegra210.dtsi would make more sense.

It's fine with me. Although technically, tegra210-smaug ships with
psci-v1.0 and tegra210-jetson-tx1 currently have psci-v0.2. However, I
did test both with the psci version set to v1.0 and the jetson-tx1, did
detect the version automatically and reverted to v0.2 (which is a
feature of psci >= v0.2). 

Please don't rely upon that.

If the DT lists 0.2 and the FW reports 1.0 we deliberately upgrade and
treat it as 1.0, but the other way around was not a deliberate decision.

If the FW is not necessarily 1.0, please do not list 1.0 in the DT.

Thanks,
Mark.