[PATCH v5 05/10] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel
From: Yannick Fertre <hidden>
Date: 2017-03-28 09:44:48
Also in:
dri-devel, linux-devicetree
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm panel drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Neil Armstrong, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This patch adds documentation of device tree bindings for the WVGA panel Ampire AM-480272H3TMQW-T01H. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Yannick Fertre <redacted> --- .../display/panel/ampire,am-480272h3tmqw-t01h.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt
diff --git a/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt b/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt
new file mode 100644
index 0000000..6812280
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt@@ -0,0 +1,26 @@ +Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. + +Required properties: +- compatible: should be "ampire,am-480272h3tmqw-t01h" + +Optional properties: +- power-supply: regulator to provide the supply voltage +- enable-gpios: GPIO pin to enable or disable the panel +- backlight: phandle of the backlight device attached to the panel + +Optional nodes: +- Video port for RGB input. + +Example: + panel_rgb: panel-rgb { + compatible = "ampire,am-480272h3tmqw-t01h"; + enable-gpios = <&gpioa 8 1>; + port { + panel_in_rgb: endpoint { + remote-endpoint = <&controller_out_rgb>; + }; + }; + };
--
1.9.1