[PATCH V2 1/2] dt-bindings: thermal: add support for Raspberry Pi thermal
From: zajec5@gmail.com (Rafał Miłecki)
Date: 2017-03-18 00:06:02
Also in:
linux-devicetree, linux-pm
Subsystem:
open firmware and flattened device tree bindings, the rest, thermal · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano
From: Rafa? Mi?ecki <rafal@milecki.pl> This commit documents binding for BCM2835 SoC thermal used in Raspberry Pi devices. Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl> --- .../bindings/thermal/raspberrypi,bcm2835-thermal | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/raspberrypi,bcm2835-thermal
diff --git a/Documentation/devicetree/bindings/thermal/raspberrypi,bcm2835-thermal b/Documentation/devicetree/bindings/thermal/raspberrypi,bcm2835-thermal
new file mode 100644
index 000000000000..fbffa9291ba9
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/raspberrypi,bcm2835-thermal@@ -0,0 +1,17 @@ +* Broadcom BCM2835 SoC Raspberry Pi Thermal + +This binding describes thermal sensor that is part of BCM2835 SoC. + +Required properties: +- compatible : Must be "raspberrypi,bcm2835-thermal" +- firmware : Reference to the Raspberry Pi firmware device node, see + raspberrypi,bcm2835-firmware for details +- #thermal-sensor-cells : Should be <0> + +Example: + +thermal { + compatible = "raspberrypi,bcm2835-thermal"; + firmware = <&firmware>; + #thermal-sensor-cells = <0>; +};
--
2.11.0