[PATCH] ARM: dts: imx: add Gateworks Ventana GW5904 support

On 03/10/2017 12:40 PM, Tim Harvey wrote:

The Gateworks Ventana GW5904 is a single-board computer based on the NXP
IMX6 SoC with the following features:
 * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q)
 * 2048MB DDR3 DRAM (4x64bit) (options up to 4GiB)
 * 8GB eMMC
 * Gateworks System Controller:
  - hardware watchdog
  - hardware monitor
  - pushbutton controller
  - EEPROM storage
  - power control
 * JTAG programmable
 * 1x miniPCIe socket (with PCIe, USB)
 * 1x miniPCIe socket (USB)
 * 1x M.2 socket (USB, 2x SIM)
 * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag)
 * GPS (optional uBlox EVA-M8M)
 * Application headers:
  - 2x RS232 UART (TX/RX/CTS/RTS)
  - 8x TTL GPIO (3x configurable as PWM)
  - 1x LVDS display 3D+C with i2c touch and PWM backlight
 * MV88E6176 GbE Switch (uplink to IMX FEC)
 * Front panel connectors:
  - 1x user programmable LED
  - 1x configurable user pushbutton
  - 1x USB OTG
  - 4x GbE LAN

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---

+	dsa {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&fec>;
+		dsa,mii-bus = <&mdio>;
+

Please consider using the new binding for DSA switches, see:

https://patchwork.kernel.org/patch/9493037/

+		switch at 0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0>; /* MDIO address 0, switch 0 in tree */
+
+			port at 0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port at 1 {
+				reg = <1>;
+				label = "lan3";
+			};
+
+			port at 2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			port at 3 {
+				reg = <3>;
+				label = "lan1";
+			};
+
+			port at 5 {
+				reg = <5>;
+				label = "cpu";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};

-- 
Florian