[PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay

Jerome Brunet [off-list ref] writes:

On Sun, 2017-02-19 at 22:41 +0100, Martin Blumenstingl wrote:

quoted

This series adds the reset GPIOs for the (external) ethernet PHYs on
all
GXBB boards.
Additionally it provides a ethernet PHY node which can be used to
specify
PHY-specific properties (this may be required if more boards require
the
"eee-broken-1000t" for the RTL8211F ethernet PHY). To make all board
.dts
consistent I chose to add the PHY node also for boards which don't
have a
RTL8211F PHY.

Looks good to me. For the patchset:
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>

Applying to v4.12/dt64 with Jerome's review.

Thanks,

Kevin