@@ -0,0 +1,56 @@
+STMicroelectronics STM32 DAC
+
+The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
+can be configured in 8- or 12-bit mode. In 12-bit mode, the data could be
+left- or right-aligned. It has two output channels, each with its own converter.
+It has built-in noise and triangle waveform generator and supports external
+triggers for conversions. The DAC's output buffer allows a high drive output
+current.
+
+Contents of a stm32 dac root node:
+-----------------------------------
+Required properties:
+- compatible: Must be "st,stm32h7-dac-core".
+- reg: Offset and length of the device's register set.
+- clocks: Must contain an entry for pclk (which feeds the peripheral bus
+  interface)
+- clock-names: Must be "pclk".
+- vref-supply: Phandle to the vref+ input analog reference supply.
+
+Optional properties:
+- resets: Must contain the phandle to the reset controller.
+- A pinctrl state named "default" for each DAC channel may be defined to set
+  DAC_OUTx pin in mode of operation for analog output on external pin.
+
+Contents of a stm32 dac child node:
+-----------------------------------
+DAC core node should contain at least one subnode, representing a
+DAC instance/channel available on the machine.
+
+Required properties:
+- compatible: Must be "st,stm32-dac".
+- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
+  Documentation/devicetree/bindings/iio/iio-bindings.txt
+- st,dac-channel: Must be either 1 or 2, to define channel in use (e.g.
+  single channels: 1 or 2)
+
+Example:
+	dac: dac at 40007400 {
+		compatible = "st,stm32h7-dac-core";
+		reg = <0x40007400 0x400>;
+		clocks = <&clk>;
+		clock-names = "pclk";
+		vref-supply = <&reg_vref>;
+
+		dac1: dac at 1 {
+			compatible = "st,stm32-dac";
+			#io-channels-cells = <1>;
+			st,dac-channel = <1>;
+		};
+
+		dac2: dac at 2 {
+			compatible = "st,stm32-dac";
+			#io-channels-cells = <1>;
+			st,dac-channel = <2>;
+		};
+	};