[PATCH V5 2/4] PCI/ASPM: add init hook to device_add
From: Sinan Kaya <hidden>
Date: 2017-03-25 21:39:05
Also in:
linux-arm-msm, linux-pci, lkml
Subsystem:
pci subsystem, the rest · Maintainers:
Bjorn Helgaas, Linus Torvalds
For bridges, have pcie_aspm_init_link_state() allocate a link_state, regardless of whether it currently has any children. pcie_aspm_init_link_state(): Called for bridges (upstream end of link) after all children have been enumerated. No longer needs to check aspm_support_enabled or pdev->has_secondary_link or the VIA quirk: pci_aspm_init() already checked that stuff, so we only need to check pdev->link_state here. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=194895 Signed-off-by: Sinan Kaya <redacted> --- drivers/pci/pcie/aspm.c | 41 ++++++++++++++++++++--------------------- 1 file changed, 20 insertions(+), 21 deletions(-)
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 74fd7c5..f5b1fa0 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c@@ -834,6 +834,23 @@ static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev) */ int pci_aspm_init(struct pci_dev *pdev) { + struct pcie_link_state *link; + + if (!aspm_support_enabled) + return 0; + + /* VIA has a strange chipset, root port is under a bridge */ + if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT && + pdev->bus->self) + return 0; + + if (!pdev->has_secondary_link) + return 0; + + link = alloc_pcie_link_state(pdev); + if (!link) + return -ENOMEM; + return 0; }
@@ -847,33 +864,16 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev) struct pcie_link_state *link; int blacklist = !!pcie_aspm_sanity_check(pdev); - if (!aspm_support_enabled) - return; - - if (pdev->link_state) - return; - - /* - * We allocate pcie_link_state for the component on the upstream - * end of a Link, so there's nothing to do unless this device has a - * Link on its secondary side. - */ - if (!pdev->has_secondary_link) - return; - - /* VIA has a strange chipset, root port is under a bridge */ - if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT && - pdev->bus->self) + if (!pdev->link_state) return; + link = pdev->link_state; down_read(&pci_bus_sem); if (list_empty(&pdev->subordinate->devices)) goto out; mutex_lock(&aspm_lock); - link = alloc_pcie_link_state(pdev); - if (!link) - goto unlock; + /* * Setup initial ASPM state. Note that we need to configure * upstream links also because capable state of them can be
@@ -898,7 +898,6 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev) pcie_set_clkpm(link, policy_to_clkpm_state(link)); } -unlock: mutex_unlock(&aspm_lock); out: up_read(&pci_bus_sem);
--
1.9.1