[PATCH v2 2/4] mvebu: xp: Add pwm properties to .dtsi files
From: Gregory CLEMENT <hidden>
Date: 2017-03-23 16:40:59
Also in:
linux-devicetree, linux-gpio, linux-pwm, lkml
Hi Ralph, On sam., mars 18 2017, Ralph Sennhauser [off-list ref] wrote: It seems that I don't receive the 1st patch of the series. Also could you refresh my mind to expose why these patchse were not apply the first time and why we should apply them now? Thanks, Gregory
quoted hunk
From: Andrew Lunn <andrew@lunn.ch> Add properties to the gpio nodes to allow them to be also used as pwm lines. Signed-off-by: Andrew Lunn <andrew@lunn.ch> URL: https://patchwork.ozlabs.org/patch/427294/ Signed-off-by: Ralph Sennhauser <redacted> --- arch/arm/boot/dts/armada-370.dtsi | 10 ++++++++-- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 ++++++++-- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 8 ++++++-- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 ++++++++-- 4 files changed, 30 insertions(+), 8 deletions(-)diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index cc011c8..aa9fe72 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi@@ -138,24 +138,30 @@ gpio0: gpio at 18100 { compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio at 18140 { compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; + clocks = <&coreclk 0>; }; gpio2: gpio at 18180 {diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 07c5090..fc3934f 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi@@ -203,24 +203,30 @@ internal-regs { gpio0: gpio at 18100 { compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio at 18140 { compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <17>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>; + clocks = <&coreclk 0>; }; }; };diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 64e936a..04dda6a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi@@ -286,24 +286,28 @@ internal-regs { gpio0: gpio at 18100 { compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio at 18140 { compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + reg = <0x18140 0x40>, <0x181c8 0x08>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; + clocks = <&coreclk 0>; }; gpio2: gpio at 18180 {diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index d1383dd..fb6d28a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi@@ -324,24 +324,30 @@ internal-regs { gpio0: gpio at 18100 { compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; + clocks = <&coreclk 0>; }; gpio1: gpio at 18140 { compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; + clocks = <&coreclk 0>; }; gpio2: gpio at 18180 {-- 2.10.2
-- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com