Thread (1 message) 1 message, 1 author, 2017-03-23

[PATCH v2] ARM: dts: mvebu: linksys: enable buffer manager support

From: Gregory CLEMENT <hidden>
Date: 2017-03-23 16:29:57
Also in: linux-devicetree, lkml

Hi Ralph,
 
 On jeu., mars 16 2017, Ralph Sennhauser [off-list ref] wrote:
Add appropriate properties to devices in the Linksys WRT AC Series for the
mvneta driver to use hardware buffer management.

Also update "soc" ranges property and set the status of bm and bm-bppi
to "okay" (SRAM).

Signed-off-by: Ralph Sennhauser <redacted>

Applied on mvebu/dt

Thanks,

Gregory
quoted hunk
---

v1 -> v2:
	Use independent pools for short (suggested by Gregory Clement)


 arch/arm/boot/dts/armada-385-linksys.dtsi     | 17 ++++++++++++++++-
 arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 17 ++++++++++++++++-
 2 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index df47bf1..aa0d225 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -59,7 +59,8 @@
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
 			i2c at 11000 {
@@ -88,6 +89,9 @@
 			ethernet at 70000 {
 				status = "okay";
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
@@ -97,6 +101,9 @@
 			ethernet at 34000 {
 				status = "okay";
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
@@ -159,6 +166,10 @@
 				status = "okay";
 			};
 
+			bm at c8000 {
+				status = "okay";
+			};
+
 			/* USB part of the eSATA/USB 2.0 port */
 			usb at 58000 {
 				status = "okay";
@@ -241,6 +252,10 @@
 			};
 		};
 
+		bm-bppi {
+			status = "okay";
+		};
+
 		pcie-controller {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 3744ba3..9efcf59 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -71,7 +71,8 @@
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
 
 		internal-regs {
 
@@ -95,6 +96,9 @@
 				pinctrl-names = "default";
 				status = "okay";
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
@@ -106,6 +110,9 @@
 				pinctrl-names = "default";
 				status = "okay";
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
@@ -186,6 +193,10 @@
 				};
 			};
 
+			bm at c8000 {
+				status = "okay";
+			};
+
 			nand at d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -259,6 +270,10 @@
 				};
 			};
 		};
+
+		bm-bppi {
+			status = "okay";
+		};
 	};
 
 	gpio_keys {
-- 
2.10.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help