[PATCH v3 7/7] ARM64: dts: marvell: armada37xx: add pinctrl definition
From: Gregory CLEMENT <hidden>
Date: 2017-03-23 15:19:26
Also in:
linux-devicetree, linux-gpio, lkml
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
Start to populate the device tree of the Armada 37xx with the pincontrol configuration used on the board providing a dts. Signed-off-by: Gregory CLEMENT <redacted> --- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 8 +++++- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 31 +++++++++++++++++++- 2 files changed, 39 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 86602c907a61..e749c5727490 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts@@ -63,6 +63,8 @@ }; &i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "okay"; };
@@ -73,6 +75,8 @@ &spi0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; m25p80 at 0 { compatible = "jedec,spi-nor";
@@ -103,6 +107,8 @@ /* Exported on the micro USB connector CON32 through an FTDI */ &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; status = "okay"; };
@@ -128,6 +134,8 @@ }; ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; phy-mode = "rgmii-id"; phy = <&phy0>; status = "okay";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index c02b13479458..2ac25f54d01d 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi@@ -186,6 +186,31 @@ clock-output-names = "xtal"; #clock-cells = <0>; }; + + spi_quad_pins: spi-quad-pins { + groups = "spi_quad"; + function = "spi"; + }; + + i2c1_pins: i2c1-pins { + groups = "i2c1"; + function = "i2c"; + }; + + i2c2_pins: i2c2-pins { + groups = "i2c2"; + function = "i2c"; + }; + + uart1_pins: uart1-pins { + groups = "uart1"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + groups = "uart2"; + function = "uart"; + }; }; pinctrl_sb: pinctrl-sb at 18800 {
@@ -203,6 +228,12 @@ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; }; + + rgmii_pins: mii-pins { + groups = "rgmii"; + function = "mii"; + }; + }; eth0: ethernet at 30000 {
--
git-series 0.9.1