[PATCH v1 2/4] clk: rockchip: rk3228: add CLK_IGNORE_UNUSED flag for some clks
From: heiko@sntech.de (Heiko Stuebner)
Date: 2017-03-22 17:24:18
Also in:
linux-clk, linux-rockchip, lkml
Hi Elaine, in general, I expect some sort of explanation in the commit message on why clocks need to be always on and cannot be handled from a driver. Also you can save flags, if you just make leave-clocks critical, which also is way safer than using clk_ignore_unused - see rk3399. Some highlights down below Am Donnerstag, 16. M?rz 2017, 16:44:52 CET schrieb Elaine Zhang:
quoted hunk ↗ jump to hunk
set pclk_cpu and hclk_cpu as critical_clocks Signed-off-by: Elaine Zhang <redacted> --- drivers/clk/rockchip/clk-rk3228.c | 66 ++++++++++++++++++++------------------- 1 file changed, 34 insertions(+), 32 deletions(-)diff --git a/drivers/clk/rockchip/clk-rk3228.c b/drivers/clk/rockchip/clk-rk3228.c index db6e5a9e6de6..9f82d089084e 100644 --- a/drivers/clk/rockchip/clk-rk3228.c +++ b/drivers/clk/rockchip/clk-rk3228.c@@ -262,9 +262,9 @@ enum rk3228_plls { RK2928_CLKGATE_CON(6), 2, GFLAGS), GATE(0, "pclk_cpu", "pclk_bus_src", 0, RK2928_CLKGATE_CON(6), 3, GFLAGS), - GATE(0, "pclk_phy_pre", "pclk_bus_src", 0, + GATE(0, "pclk_phy_pre", "pclk_bus_src", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(6), 4, GFLAGS), - GATE(0, "pclk_ddr_pre", "pclk_bus_src", 0, + GATE(0, "pclk_ddr_pre", "pclk_bus_src", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(6), 13, GFLAGS),
both not needed if you make pclk_ddrupctl and friends critical
quoted hunk ↗ jump to hunk
/* PD_VIDEO */@@ -445,7 +445,7 @@ enum rk3228_plls { RK2928_CLKGATE_CON(2), 12, GFLAGS, &rk3228_spdif_fracmux), - GATE(0, "jtag", "ext_jtag", 0, + GATE(0, "jtag", "ext_jtag", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(1), 3, GFLAGS), GATE(0, "sclk_otgphy0", "xin24m", 0,@@ -527,24 +527,24 @@ enum rk3228_plls { /* PD_VOP */ GATE(0, "aclk_rga", "aclk_rga_pre", 0, RK2928_CLKGATE_CON(13), 0, GFLAGS), - GATE(0, "aclk_rga_noc", "aclk_rga_pre", 0, RK2928_CLKGATE_CON(13), 11, GFLAGS), + GATE(0, "aclk_rga_noc", "aclk_rga_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 11, GFLAGS), GATE(0, "aclk_iep", "aclk_iep_pre", 0, RK2928_CLKGATE_CON(13), 2, GFLAGS), - GATE(0, "aclk_iep_noc", "aclk_iep_pre", 0, RK2928_CLKGATE_CON(13), 9, GFLAGS), + GATE(0, "aclk_iep_noc", "aclk_iep_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 9, GFLAGS),
please make noc-clocks critical, see rk3399
GATE(ACLK_VOP, "aclk_vop", "aclk_vop_pre", 0, RK2928_CLKGATE_CON(13), 5, GFLAGS), - GATE(0, "aclk_vop_noc", "aclk_vop_pre", 0, RK2928_CLKGATE_CON(13), 12, GFLAGS), + GATE(0, "aclk_vop_noc", "aclk_vop_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 12, GFLAGS), GATE(0, "aclk_hdcp", "aclk_hdcp_pre", 0, RK2928_CLKGATE_CON(14), 10, GFLAGS), - GATE(0, "aclk_hdcp_noc", "aclk_hdcp_pre", 0, RK2928_CLKGATE_CON(13), 10, GFLAGS), + GATE(0, "aclk_hdcp_noc", "aclk_hdcp_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 10, GFLAGS), GATE(0, "hclk_rga", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 1, GFLAGS), GATE(0, "hclk_iep", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 3, GFLAGS), GATE(HCLK_VOP, "hclk_vop", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 6, GFLAGS), - GATE(0, "hclk_vio_ahb_arbi", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 7, GFLAGS), - GATE(0, "hclk_vio_noc", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 8, GFLAGS), - GATE(0, "hclk_vop_noc", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(13), 13, GFLAGS), + GATE(0, "hclk_vio_ahb_arbi", "hclk_vio_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 7, GFLAGS), + GATE(0, "hclk_vio_noc", "hclk_vio_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 8, GFLAGS), + GATE(0, "hclk_vop_noc", "hclk_vio_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 13, GFLAGS), GATE(0, "hclk_vio_h2p", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 7, GFLAGS), - GATE(0, "hclk_hdcp_mmu", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 12, GFLAGS), + GATE(0, "hclk_hdcp_mmu", "hclk_vio_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(14), 12, GFLAGS),
I would assume the hdcp-iommu should handle this clock, why does it need to be always on?
quoted hunk ↗ jump to hunk
GATE(PCLK_HDMI_CTRL, "pclk_hdmi_ctrl", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 6, GFLAGS), GATE(0, "pclk_vio_h2p", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 8, GFLAGS), GATE(0, "pclk_hdcp", "hclk_vio_pre", 0, RK2928_CLKGATE_CON(14), 11, GFLAGS),@@ -558,13 +558,13 @@ enum rk3228_plls { GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 2, GFLAGS), GATE(HCLK_NANDC, "hclk_nandc", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 3, GFLAGS), GATE(0, "hclk_host0", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 6, GFLAGS), - GATE(0, "hclk_host0_arb", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 7, GFLAGS), + GATE(0, "hclk_host0_arb", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(11), 7, GFLAGS), GATE(0, "hclk_host1", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 8, GFLAGS), - GATE(0, "hclk_host1_arb", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 9, GFLAGS), + GATE(0, "hclk_host1_arb", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(11), 9, GFLAGS), GATE(0, "hclk_host2", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 10, GFLAGS), GATE(0, "hclk_otg", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 12, GFLAGS), - GATE(0, "hclk_otg_pmu", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 13, GFLAGS), - GATE(0, "hclk_host2_arb", "hclk_peri", 0, RK2928_CLKGATE_CON(11), 14, GFLAGS), + GATE(0, "hclk_otg_pmu", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(11), 13, GFLAGS), + GATE(0, "hclk_host2_arb", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(11), 14, GFLAGS),
same as noc clocks, make arbiter clocks critical instead
quoted hunk ↗ jump to hunk
GATE(0, "hclk_peri_noc", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(12), 1, GFLAGS), GATE(PCLK_GMAC, "pclk_gmac", "pclk_peri", 0, RK2928_CLKGATE_CON(11), 5, GFLAGS),@@ -572,15 +572,15 @@ enum rk3228_plls { /* PD_GPU */ GATE(0, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 14, GFLAGS), - GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 15, GFLAGS), + GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(13), 15, GFLAGS), /* PD_BUS */ - GATE(0, "sclk_initmem_mbist", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS), - GATE(0, "aclk_initmem", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 0, GFLAGS), + GATE(0, "sclk_initmem_mbist", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(8), 1, GFLAGS), + GATE(0, "aclk_initmem", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(8), 0, GFLAGS), GATE(ACLK_DMAC, "aclk_dmac_bus", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 2, GFLAGS), GATE(0, "aclk_bus_noc", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 1, GFLAGS), - GATE(0, "hclk_rom", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 3, GFLAGS), + GATE(0, "hclk_rom", "hclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(8), 3, GFLAGS), GATE(HCLK_I2S0_8CH, "hclk_i2s0_8ch", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 7, GFLAGS), GATE(HCLK_I2S1_8CH, "hclk_i2s1_8ch", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 8, GFLAGS), GATE(HCLK_I2S2_2CH, "hclk_i2s2_2ch", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 9, GFLAGS),@@ -589,18 +589,18 @@ enum rk3228_plls { GATE(0, "hclk_crypto_mst", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 11, GFLAGS), GATE(0, "hclk_crypto_slv", "hclk_cpu", 0, RK2928_CLKGATE_CON(8), 12, GFLAGS), - GATE(0, "pclk_ddrupctl", "pclk_ddr_pre", 0, RK2928_CLKGATE_CON(8), 4, GFLAGS), - GATE(0, "pclk_ddrmon", "pclk_ddr_pre", 0, RK2928_CLKGATE_CON(8), 6, GFLAGS), - GATE(0, "pclk_msch_noc", "pclk_ddr_pre", 0, RK2928_CLKGATE_CON(10), 2, GFLAGS), + GATE(0, "pclk_ddrupctl", "pclk_ddr_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(8), 4, GFLAGS), + GATE(0, "pclk_ddrmon", "pclk_ddr_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(8), 6, GFLAGS), + GATE(0, "pclk_msch_noc", "pclk_ddr_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 2, GFLAGS),
again critical
- GATE(0, "pclk_efuse_1024", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 13, GFLAGS), - GATE(0, "pclk_efuse_256", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 14, GFLAGS), + GATE(0, "pclk_efuse_1024", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(8), 13, GFLAGS), + GATE(0, "pclk_efuse_256", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(8), 14, GFLAGS),
we do have a general efuse driver, why do these clocks need to be on?
quoted hunk ↗ jump to hunk
GATE(PCLK_I2C0, "pclk_i2c0", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 15, GFLAGS), GATE(PCLK_I2C1, "pclk_i2c1", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 0, GFLAGS), GATE(PCLK_I2C2, "pclk_i2c2", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 1, GFLAGS), GATE(PCLK_I2C3, "pclk_i2c3", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 2, GFLAGS), GATE(PCLK_TIMER, "pclk_timer0", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 4, GFLAGS), - GATE(0, "pclk_stimer", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 5, GFLAGS), + GATE(0, "pclk_stimer", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 5, GFLAGS), GATE(PCLK_SPI0, "pclk_spi0", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 6, GFLAGS), GATE(PCLK_PWM, "pclk_rk_pwm", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 7, GFLAGS), GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 8, GFLAGS),@@ -616,20 +616,20 @@ enum rk3228_plls { GATE(0, "pclk_sgrf", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 2, GFLAGS), GATE(0, "pclk_sim", "pclk_cpu", 0, RK2928_CLKGATE_CON(10), 3, GFLAGS), - GATE(0, "pclk_ddrphy", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 3, GFLAGS), - GATE(0, "pclk_acodecphy", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 5, GFLAGS), + GATE(0, "pclk_ddrphy", "pclk_phy_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 3, GFLAGS), + GATE(0, "pclk_acodecphy", "pclk_phy_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 5, GFLAGS), GATE(PCLK_HDMI_PHY, "pclk_hdmiphy", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 7, GFLAGS), GATE(0, "pclk_vdacphy", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 8, GFLAGS), - GATE(0, "pclk_phy_noc", "pclk_phy_pre", 0, RK2928_CLKGATE_CON(10), 9, GFLAGS), + GATE(0, "pclk_phy_noc", "pclk_phy_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(10), 9, GFLAGS), GATE(0, "aclk_vpu", "aclk_vpu_pre", 0, RK2928_CLKGATE_CON(15), 0, GFLAGS), - GATE(0, "aclk_vpu_noc", "aclk_vpu_pre", 0, RK2928_CLKGATE_CON(15), 4, GFLAGS), + GATE(0, "aclk_vpu_noc", "aclk_vpu_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(15), 4, GFLAGS), GATE(0, "aclk_rkvdec", "aclk_rkvdec_pre", 0, RK2928_CLKGATE_CON(15), 2, GFLAGS), - GATE(0, "aclk_rkvdec_noc", "aclk_rkvdec_pre", 0, RK2928_CLKGATE_CON(15), 6, GFLAGS), + GATE(0, "aclk_rkvdec_noc", "aclk_rkvdec_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(15), 6, GFLAGS), GATE(0, "hclk_vpu", "hclk_vpu_pre", 0, RK2928_CLKGATE_CON(15), 1, GFLAGS), - GATE(0, "hclk_vpu_noc", "hclk_vpu_pre", 0, RK2928_CLKGATE_CON(15), 5, GFLAGS), + GATE(0, "hclk_vpu_noc", "hclk_vpu_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(15), 5, GFLAGS), GATE(0, "hclk_rkvdec", "hclk_rkvdec_pre", 0, RK2928_CLKGATE_CON(15), 3, GFLAGS), - GATE(0, "hclk_rkvdec_noc", "hclk_rkvdec_pre", 0, RK2928_CLKGATE_CON(15), 7, GFLAGS), + GATE(0, "hclk_rkvdec_noc", "hclk_rkvdec_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(15), 7, GFLAGS), /* PD_MMC */ MMC(SCLK_SDMMC_DRV, "sdmmc_drv", "sclk_sdmmc", RK3228_SDMMC_CON0, 1),@@ -644,6 +644,8 @@ enum rk3228_plls { static const char *const rk3228_critical_clocks[] __initconst = { "aclk_cpu", + "pclk_cpu", + "hclk_cpu", "aclk_peri", "hclk_peri", "pclk_peri",
Heiko