Thread (27 messages) 27 messages, 7 authors, 2017-04-05
STALE3379d REVIEWED: 7 (7M)
Revisions (3)
  1. v2 [diff vs current]
  2. v3 current
  3. v4 [diff vs current]

[PATCH v3 05/11] Documentation: DT: bindings: input: touschcreen: remove sun4i documentation

From: Quentin Schulz <hidden>
Date: 2017-03-21 15:46:10
Also in: linux-devicetree, linux-iio, linux-input, lkml
Subsystem: input (keyboard, mouse, joystick, touchscreen) drivers, open firmware and flattened device tree bindings, the rest · Maintainers: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

This patch removes the sun4i touchscreen controller binding
documentation since it has been merged with the sun4i GPADC binding
documentation.

Signed-off-by: Quentin Schulz <redacted>
Acked-by: Rob Herring <robh@kernel.org>
---

added in v2

 .../bindings/input/touchscreen/sun4i.txt           | 38 ----------------------
 1 file changed, 38 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
deleted file mode 100644
index 89abecd..0000000
--- a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-sun4i resistive touchscreen controller
---------------------------------------
-
-Required properties:
- - compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or
-   "allwinner,sun6i-a31-ts"
- - reg: mmio address range of the chip
- - interrupts: interrupt to which the chip is connected
- - #thermal-sensor-cells: shall be 0
-
-Optional properties:
- - allwinner,ts-attached	 : boolean indicating that an actual touchscreen
-				   is attached to the controller
- - allwinner,tp-sensitive-adjust : integer (4 bits)
-				   adjust sensitivity of pen down detection
-				   between 0 (least sensitive) and 15
-				   (defaults to 15)
- - allwinner,filter-type	 : integer (2 bits)
-				   select median and averaging filter
-				   samples used for median / averaging filter
-				   0: 4/2
-				   1: 5/3
-				   2: 8/4
-				   3: 16/8
-				   (defaults to 1)
-
-Example:
-
-	rtp: rtp at 01c25000 {
-		compatible = "allwinner,sun4i-a10-ts";
-		reg = <0x01c25000 0x100>;
-		interrupts = <29>;
-		allwinner,ts-attached;
-		#thermal-sensor-cells = <0>;
-		/* sensitive/noisy touch panel */
-		allwinner,tp-sensitive-adjust = <0>;
-		allwinner,filter-type = <3>;
-	};
-- 
2.9.3
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help