2017-03-13 22:34 GMT+01:00 Tony Lindgren [off-list ref]:

* Bartosz Golaszewski [off-list ref] [170313 09:45]:

quoted

This board has an external oscillator supplying the reference clock
signal for SATA. Its rate is fixed at 100Mhz. Add a corresponding
device tree node.

Is this the 100MHz clock from PCIe? Just like on dm814x-evm as noted
in the workaround thread below:

http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/716/p/181083/671141

Regards,

Tony

Hi Tony,

these signals come from a TI CDCM61002 (U30 on the board's
schematics). It's hardwired to 100mHZ output.

Thanks,
Bartosz Golaszewski