[PATCH 1/2] ARM: dts: sun4i: Add CAN node and can0_pins_a pinctrl settings
From: Patrick Menschel <hidden>
Date: 2017-03-12 13:31:04
Also in:
linux-can, linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The A10 SoC has an on-board CAN controller. This patch adds the device node and the corresponding pinctrl settings for pins PH20 and PH21. This patch is adapted from the description in Documentation/devicetree/bindings/net/can/sun4i_can.txt Signed-off-by: Patrick Menschel <redacted> --- arch/arm/boot/dts/sun4i-a10.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index b14a428..210b616 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi@@ -1160,6 +1160,13 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + can0_pins_a: can0 at 0 { + allwinner,pins = "PH20","PH21"; + allwinner,function = "can"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; timer at 01c20c00 {
@@ -1376,5 +1383,13 @@ clocks = <&apb1_gates 7>; status = "disabled"; }; + + can0: can at 01c2bc00 { + compatible = "allwinner,sun4i-a10-can"; + reg = <0x01c2bc00 0x400>; + interrupts = <26>; + clocks = <&apb1_gates 4>; + status = "disabled"; + }; }; };
--
1.9.1