Allwinner A31 framebuffer fails with new CCU clock bindings

Hi,

On Sat, Feb 11, 2017 at 12:08:40PM +0000, Bob Ham wrote:

Hi there,

I have a Mele A1000G Quad top set box with an Allwinner A31 chip.
Unfortunately, the framebuffer is failing on recent kernels.  I have a
1080p monitor connected to the HDMI output.  During boot, the monitor
goes blank and reports "No Signal".

I've done a git bisect and determined that this is the offending commit:

# first bad commit: [78a9f0dbcd6015cdd1114dc7d78554fd5bb28010] ARM: dts: sun6i: switch A31/A31s to new CCU clock bindings


On IRC, MoeIcenowy requested the contents
of /sys/kernel/debug/clk/clk_summary.  I don't know how useful it will
be but I've put up two versions, one from the bad commit and another
from the previous, good commit in the bisect:

http://settrans.net/~rah/misc/sun6i-a31-bad-fb-clk_summary-good.txt
http://settrans.net/~rah/misc/sun6i-a31-bad-fb-clk_summary-bad.txt

Are you sure the good one works? None of the display clocks are
enabled.

Could you add "clk_ignore_unused" to the kernel boot parameters and
see if it works?

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170213/030fb381/attachment.sig>