On Sun, 2017-02-19 at 22:41 +0100, Martin Blumenstingl wrote:

This series adds the reset GPIOs for the (external) ethernet PHYs on
all
GXBB boards.
Additionally it provides a ethernet PHY node which can be used to
specify
PHY-specific properties (this may be required if more boards require
the
"eee-broken-1000t" for the RTL8211F ethernet PHY). To make all board
.dts
consistent I chose to add the PHY node also for boards which don't
have a
RTL8211F PHY.

Looks good to me. For the patchset:
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>

Martin Blumenstingl (9):
? ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO
? ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO
? ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO
? ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset
GPIO
? ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO
? ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset
GPIO
? ARM64: dts: meson-gxbb-p201: fix ethernet support
? ARM64: dts: amlogic: add the ethernet TX delay configuration
? ARM64: dts: meson-gx: remove the phy-mode property from meson-gx

?arch/arm64/boot/dts/amlogic/meson-gx.dtsi??????????|??1 -
?.../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts????| 17
++++++++++++++
?.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts |??7 ++++++
?arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts????| 25
+++++++++++++++++++++
?arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts????| 11 +++++++++
?arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi???|??6 -----
?.../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi??????| 21
++++++++++++++++-
?.../boot/dts/amlogic/meson-gxbb-wetek-hub.dts??????| 26
++++++++++++++++++++++
?.../boot/dts/amlogic/meson-gxbb-wetek-play2.dts????| 26
++++++++++++++++++++++
?.../boot/dts/amlogic/meson-gxl-s905d-p230.dts??????|??2 ++
?.../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts |??2 ++
?arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts?????|??2 ++
?12 files changed, 138 insertions(+), 8 deletions(-)