[PATCH V2 4/4] dts/imx6q-b850v3: Use megachips-stdpxxxx-ge-b850v3-fw bridges (LVDS-DP++)
From: Peter Senna Tschudin <hidden>
Date: 2017-02-28 14:37:32
Also in:
dri-devel, linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Configures the megachips-stdpxxxx-ge-b850v3-fw bridges on the GE B850v3 dts file. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Martin Donnelly <redacted> Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Enric Balletbo i Serra <redacted> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Rob Herring <robh@kernel.org> Cc: Fabio Estevam <redacted> Signed-off-by: Peter Senna Tschudin <redacted> --- Unchanged from V1. arch/arm/boot/dts/imx6q-b850v3.dts | 68 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index b237429..3ec54da 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts@@ -72,6 +72,13 @@ fsl,data-mapping = "spwg"; fsl,data-width = <24>; status = "okay"; + + port at 4 { + reg = <4>; + lvds0_out: endpoint { + remote-endpoint = <&stdp4028_in>; + }; + }; }; };
@@ -146,3 +153,64 @@ &usdhc2 { status = "disabled"; }; + +&mux2_i2c2 { + status = "okay"; + clock-frequency = <100000>; + + stdp4028 at 73 { + compatible = "megachips,stdp4028-ge-b850v3-fw"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x73>; + + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { + reg = <0>; + stdp4028_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + port at 1 { + reg = <1>; + stdp4028_out: endpoint { + remote-endpoint = <&stdp2690_in>; + }; + }; + }; + }; + + stdp2690 at 72 { + compatible = "megachips,stdp2690-ge-b850v3-fw"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x72>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { + reg = <0>; + stdp2690_in: endpoint { + remote-endpoint = <&stdp4028_out>; + }; + }; + + port at 1 { + reg = <1>; + stdp2690_out: endpoint { + /* Connector for external display */ + }; + }; + }; + }; +};
--
2.9.3