[PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G
From: Chunyan Zhang <hidden>
Date: 2017-02-24 08:02:17
Also in:
linux-devicetree, lkml
On ?, 2? 23, 2017 at 06:00:20?? -0600, Rob Herring wrote:
On Tue, Feb 21, 2017 at 12:55 AM, Chunyan Zhang [off-list ref] wrote:quoted
From: Orson Zhai <redacted> SC9860G is a 8 cores of A53 SoC with 4G LTE support SoC from Spreadtrum. According to regular hierarchy of sprd dts, whale2.dtsi contains SoC peripherals IP nodes, sc9860.dtsi contains stuff related to ARM core stuff and sp9860g dts is for the board level. Signed-off-by: Orson Zhai <redacted> Signed-off-by: Chunyan Zhang <redacted> --- arch/arm64/boot/dts/sprd/Makefile | 3 +- arch/arm64/boot/dts/sprd/sc9860.dtsi | 531 ++++++++++++++++++++++++++++++ arch/arm64/boot/dts/sprd/sp9860g-1h10.dts | 56 ++++ arch/arm64/boot/dts/sprd/whale2.dtsi | 70 ++++ 4 files changed, 659 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/sprd/sc9860.dtsi create mode 100644 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts create mode 100644 arch/arm64/boot/dts/sprd/whale2.dtsidiff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile index b658c5e..f0535e6 100644 --- a/arch/arm64/boot/dts/sprd/Makefile +++ b/arch/arm64/boot/dts/sprd/Makefile@@ -1,4 +1,5 @@ -dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb +dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \ + sp9860g-1h10.dtb always := $(dtb-y) subdir-y := $(dts-dirs)diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi new file mode 100644 index 0000000..73deb4e --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi@@ -0,0 +1,531 @@ +/* + * Spreadtrum SP9860 SoC DTS file + * + * Copyright (C) 2016, Spreadtrum Communications Inc. + * + * This file is licensed under a dual GPLv2 or X11 license.Please use SPDX-License-Identifier tag instead.
Just to double check, if I use it like: SPDX-License-Identifier: (GPL-2.0 or X11) Is this what you mean? Will this file still be licensed under the same terms it was, right?
quoted
+ */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "whale2.dtsi" + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + core2 { + cpu = <&CPU6>; + }; + core3 { + cpu = <&CPU7>; + }; + }; + }; + + CPU0: cpu at 530000 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530000>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + + CPU1: cpu at 530001 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530001>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + + CPU2: cpu at 530002 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530002>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + + CPU3: cpu at 530003 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530003>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + + CPU4: cpu at 530100 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530100>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + + CPU5: cpu at 530101 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530101>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + + CPU6: cpu at 530102 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530102>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + + CPU7: cpu at 530103 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530103>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + }; + + idle-states{ + entry-method = "arm,psci"; + + CORE_PD: core_pd { + compatible = "arm,idle-state"; + entry-latency-us = <1000>; + exit-latency-us = <700>; + min-residency-us = <2500>; + local-timer-stop; + arm,psci-suspend-param = <0x00010002>; + }; + + CLUSTER_PD: cluster_pd { + compatible = "arm,idle-state"; + entry-latency-us = <1000>; + exit-latency-us = <1000>; + min-residency-us = <3000>; + local-timer-stop; + arm,psci-suspend-param = <0x01010003>; + }; + }; + + gic: interrupt-controller at 12001000 { + compatible = "arm,gic-400"; + reg = <0 0x12001000 0 0x1000>, + <0 0x12002000 0 0x2000>, + <0 0x12004000 0 0x2000>, + <0 0x12006000 0 0x2000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) + | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) + | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) + | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) + | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) + | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CPU0>, + <&CPU1>, + <&CPU2>, + <&CPU3>, + <&CPU4>, + <&CPU5>, + <&CPU6>, + <&CPU7>; + }; + + soc { + soc_funnel: funnel at 10001000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x10001000 0 0x1000>;If all the devices are within 0x1xxxxxxx, then use ranges property to limit the address range. It doesn't look like address or size cells needs to be 2.
There're some devices not included in this DT for now whose addresses is 64-bit. I will add more devices into this device tree later on.
quoted
+ clocks = <&ext_26m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { + reg = <0>; + soc_funnel_out_port: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + + port at 1 { + reg = <0>; + soc_funnel_in_port: endpoint { + slave-mode; + remote-endpoint = + <&main_funnel_out_port>; + }; + }; + }; + }; + + etb at 10003000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x10003000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + port { + etb_in: endpoint { + slave-mode; + remote-endpoint = + <&soc_funnel_out_port>; + }; + }; + }; + + cluster0_funnel: funnel at 11001000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { + reg = <0>; + cluster0_funnel_out_port: endpoint { + remote-endpoint = + <&cluster0_etf_in>; + }; + }; + + port at 1 { + reg = <0>; + cluster0_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out>; + }; + }; + + port at 2 { + reg = <1>; + cluster0_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out>; + }; + }; + + port at 3 { + reg = <2>; + cluster0_funnel_in_port2: endpoint { + slave-mode; + remote-endpoint = <&etm2_out>; + }; + }; + + port at 4 { + reg = <4>; + cluster0_funnel_in_port3: endpoint { + slave-mode; + remote-endpoint = <&etm3_out>; + }; + }; + }; + }; + + cluster1_funnel: funnel at 11002000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x11002000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { + reg = <0>; + cluster1_funnel_out_port: endpoint { + remote-endpoint = + <&cluster1_etf_in>; + }; + }; + + port at 1 { + reg = <0>; + cluster1_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etm4_out>; + }; + }; + + port at 2 { + reg = <1>; + cluster1_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etm5_out>; + }; + }; + + port at 3 { + reg = <2>; + cluster1_funnel_in_port2: endpoint { + slave-mode; + remote-endpoint = <&etm6_out>; + }; + }; + + port at 4 { + reg = <3>; + cluster1_funnel_in_port3: endpoint { + slave-mode; + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + cluster0_etf: etf at 11003000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x11003000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port at 0 { + cluster0_etf_out: endpoint { + remote-endpoint = + <&main_funnel_in_port0>; + }; + }; + + port at 1 { + cluster0_etf_in: endpoint { + slave-mode; + remote-endpoint = + <&cluster0_funnel_out_port>; + }; + }; + }; + + cluster1_etf: etf at 11004000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x11004000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port at 0 { + cluster1_etf_out: endpoint { + remote-endpoint = + <&main_funnel_in_port1>; + }; + }; + + port at 1 { + cluster1_etf_in: endpoint { + slave-mode; + remote-endpoint = + <&cluster1_funnel_out_port>; + }; + }; + }; + + main_funnel: funnel at 11005000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x11005000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { + reg = <0>; + main_funnel_out_port: endpoint { + remote-endpoint = + <&soc_funnel_in_port>; + }; + }; + + port at 1 { + reg = <0>; + main_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = + <&cluster0_etf_out>; + }; + }; + + port at 2 { + reg = <1>; + main_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = + <&cluster1_etf_out>; + }; + }; + }; + }; + + etm at 11440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11440000 0 0x1000>; + cpu = <&CPU0>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm0_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in_port0>; + }; + }; + }; + + etm at 11540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11540000 0 0x1000>; + cpu = <&CPU1>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm1_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in_port1>; + }; + }; + }; + + etm at 11640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11640000 0 0x1000>; + cpu = <&CPU2>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm2_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in_port2>; + }; + }; + }; + + etm at 11740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11740000 0 0x1000>; + cpu = <&CPU3>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm3_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in_port3>; + }; + }; + }; + + etm at 11840000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11840000 0 0x1000>; + cpu = <&CPU4>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm4_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in_port0>; + }; + }; + }; + + etm at 11940000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11940000 0 0x1000>; + cpu = <&CPU5>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm5_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in_port1>; + }; + }; + }; + + etm at 11a40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11a40000 0 0x1000>; + cpu = <&CPU6>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm6_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in_port2>; + }; + }; + }; + + etm at 11b40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11b40000 0 0x1000>; + cpu = <&CPU7>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm7_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in_port3>; + }; + }; + }; + }; +};diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts new file mode 100644 index 0000000..5faa452 --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts@@ -0,0 +1,56 @@ +/* + * Spreadtrum SP9860g board DTS file + * + * Copyright (C) 2017, Spreadtrum Communications Inc. + * + * This file is licensed under a dual GPLv2 or X11 license. + */ + +/dts-v1/; + +#include "sc9860.dtsi" + +/ { + model = "Spreadtrum SP9860G 3GFHD Board"; + + compatible = "sprd,sp9860g-1h10", "sprd,sc9860"; + + aliases { + serial0 = &uart0; /* for Bluetooth */ + serial1 = &uart1; /* UART console */ + serial2 = &uart2; /* Reserved */ + serial3 = &uart3; /* for GPS */ + }; + + memory{ + device_type = "memory"; + reg = <0x0 0x80000000 0 0x60000000>, + <0x1 0x80000000 0 0x60000000>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +};diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi new file mode 100644 index 0000000..64f06d9 --- /dev/null +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi@@ -0,0 +1,70 @@ +/* + * Spreadtrum Whale2 SoC platform peripherals DTS file + * + * Copyright (C) 2016, Spreadtrum Communications Inc. + * + * This file is licensed under a dual GPLv2 or X11 license. + */ + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ap-apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x70000000 0x10000000>;Probably you should have 2 buses for each range of addresses.
I may not understand your point, I just looked at the SoC specification, the address range of this AP APB bus is from 0x70000000 ~ 0x7fffffff.
quoted
+ + uart0: serial at 70000000 { + compatible = "sprd,sc9838-uart", + "sprd,sc9836-uart"; + reg = <0x000000 0x100>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart1: serial at 70100000 { + compatible = "sprd,sc9838-uart", + "sprd,sc9836-uart"; + reg = <0x100000 0x100>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart2: serial at 70200000 { + compatible = "sprd,sc9838-uart", + "sprd,sc9836-uart"; + reg = <0x200000 0x100>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart3: serial at 70300000 { + compatible = "sprd,sc9838-uart", + "sprd,sc9836-uart"; + reg = <0x300000 0x100>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + }; + + ext_26m: ext-26m {This should be at the top-level. It is not part of the bus.
This clock node is in 'soc' node, not under 'ap-apb'. Since there're other clocks on SC9860 which would have 'reg' property, we thought this fixed clock would be better under 'soc' with other clocks. Thanks your comments, Chunyan
quoted
+ compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "ext_26m"; + }; + }; +}; -- 2.7.4