Thread (22 messages) flat view 22 messages, 4 authors, 2017-01-10
STALE3526d REVIEWED: 6 (6M)

1 review trailer (1 from subsystem maintainers).

[PATCH 11/16] arm64: dts: r8a7796: Use R-Car Gen 3 fallback binding for i2c nodes

From: Simon Horman <hidden>
Date: 2017-01-06 11:17:53
Also in: linux-renesas-soc
Subsystem: arm/risc-v/renesas architecture, the rest · Maintainers: Geert Uytterhoeven, Magnus Damm, Linus Torvalds

Use recently added R-Car Gen 3 fallback binding for i2c nodes in
DT for r8a7796 SoC.

This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7796 and the
fallback binding for R-Car Gen 3.

Signed-off-by: Simon Horman <redacted>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index a37bb5eb062c..26a0506e3013 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -269,7 +269,8 @@
 		i2c0: i2c at e6500000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7796";
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
 			reg = <0 0xe6500000 0 0x40>;
 			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 931>;
@@ -284,7 +285,8 @@
 		i2c1: i2c at e6508000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7796";
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
 			reg = <0 0xe6508000 0 0x40>;
 			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 930>;
@@ -299,7 +301,8 @@
 		i2c2: i2c at e6510000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7796";
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
 			reg = <0 0xe6510000 0 0x40>;
 			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 929>;
@@ -314,7 +317,8 @@
 		i2c3: i2c at e66d0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7796";
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
 			reg = <0 0xe66d0000 0 0x40>;
 			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 928>;
@@ -328,7 +332,8 @@
 		i2c4: i2c at e66d8000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7796";
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
 			reg = <0 0xe66d8000 0 0x40>;
 			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 927>;
@@ -342,7 +347,8 @@
 		i2c5: i2c at e66e0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7796";
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
 			reg = <0 0xe66e0000 0 0x40>;
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 919>;
@@ -356,7 +362,8 @@
 		i2c6: i2c at e66e8000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,i2c-r8a7796";
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
 			reg = <0 0xe66e8000 0 0x40>;
 			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 918>;
-- 
2.7.0.rc3.207.g0ac5344
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help