Thread (1 message) 1 message, 1 author, 2017-01-27

[PATCH] arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci

From: Gregory CLEMENT <hidden>
Date: 2017-01-27 10:49:32
Also in: linux-devicetree

Hi Russell,
 
 On ven., janv. 13 2017, Russell King [off-list ref] wrote:
Testing with an Armada 8040 board shows that adding the generic-ahci
compatible to the CP110 AHCI nodes gets us working AHCI on the board.
A previous patch series posted by Thomas Petazzoni was retracted when
it was realised that the IP was supposed to be, and is, compatible
with the standard register layout.

Add this compatible.

Applied on mvebu/dt64

(not that it didn't apply cleanly on the mainline because in mainline we
don't use yet the ICU for the interrupt)

Thanks,

Gregory
quoted hunk
Signed-off-by: Russell King <redacted>
---
 arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 3 ++-
 arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi  | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 464b491c7291..65ad781d7910 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -128,7 +128,8 @@
 			};
 
 			cpm_sata0: sata at 540000 {
-				compatible = "marvell,armada-8k-ahci";
+				compatible = "marvell,armada-8k-ahci",
+					     "generic-ahci";
 				reg = <0x540000 0x30000>;
 				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&cpm_syscon0 1 15>;
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index b10f4781d8fb..168d667d50a3 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -128,7 +128,8 @@
 			};
 
 			cps_sata0: sata at 540000 {
-				compatible = "marvell,armada-8k-ahci";
+				compatible = "marvell,armada-8k-ahci",
+					     "generic-ahci";
 				reg = <0x540000 0x30000>;
 				interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&cps_syscon0 1 15>;
-- 
2.7.4
-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help