[PATCH 1/5] ARM: dts: armada388-clearfog: add phy reset gpio-hog
From: Russell King <hidden>
Date: 2017-01-02 15:27:11
Also in:
linux-devicetree
Subsystem:
the rest · Maintainer:
Linus Torvalds
Possibly related (same subject, not in this thread)
- 2017-01-05 · Re: [PATCH 1/5] ARM: dts: armada388-clearfog: add phy reset gpio-hog · Gregory CLEMENT <hidden>
- 2017-01-05 · Re: [PATCH 1/5] ARM: dts: armada388-clearfog: add phy reset gpio-hog · Russell King - ARM Linux <linux@armlinux.org.uk>
- 2017-01-05 · Re: [PATCH 1/5] ARM: dts: armada388-clearfog: add phy reset gpio-hog · Gregory CLEMENT <hidden>
- 2017-01-05 · Re: [PATCH 1/5] ARM: dts: armada388-clearfog: add phy reset gpio-hog · Russell King - ARM Linux <hidden>
- 2017-01-04 · Re: [PATCH 1/5] ARM: dts: armada388-clearfog: add phy reset gpio-hog · Gregory CLEMENT <hidden>
Signed-off-by: Russell King <redacted> --- arch/arm/boot/dts/armada-388-clearfog-base.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts
index f86e1876fb38..da788ea40717 100644
--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts@@ -74,7 +74,17 @@ phy = <&phy1>; }; +&gpio0 { + phy1_reset { + gpio-hog; + gpios = <19 GPIO_ACTIVE_LOW>; + output-low; + line-name = "phy1-reset"; + }; +}; + &mdio { + pinctrl-0 = <&mdio_pins µsom_phy_clk_pins &clearfog_phy_pins>; phy1: ethernet-phy at 1 { /* * Annoyingly, the marvell phy driver configures the LED
@@ -87,6 +97,11 @@ }; &pinctrl { + /* phy1 reset */ + clearfog_phy_pins: clearfog-phy-pins { + marvell,pins = "mpp19"; + marvell,function = "gpio"; + }; rear_button_pins: rear-button-pins { marvell,pins = "mpp44"; marvell,function = "gpio";
--
2.7.4