[PATCH v3 1/8] ASoC: sun4i-i2s: Update binding documentation to include A31
From: Mylène Josserand <hidden>
Date: 2017-01-31 10:08:28
Also in:
alsa-devel, linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, sound - soc layer / dynamic audio power management (asoc), the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Liam Girdwood, Mark Brown, Linus Torvalds
Add a new compatible for sun4i-i2s driver to handle some SoCs that have a reset line that must be asserted/deasserted. This new compatible, "allwinner,sun6i-a31-i2s", requires the property "resets" which should be a phandle to the reset line. Except these differences, the compatible is identical to previous one which will not handle a reset line. Signed-off-by: Myl?ne Josserand <redacted> --- Documentation/devicetree/bindings/sound/sun4i-i2s.txt | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
index 7a2c0945fd22..b71df552bc0c 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt@@ -7,6 +7,7 @@ Required properties: - compatible: should be one of the following: - "allwinner,sun4i-a10-i2s" + - "allwinner,sun6i-a31-i2s" - reg: physical base address of the controller and length of memory mapped region. - interrupts: should contain the I2S interrupt.
@@ -19,6 +20,10 @@ Required properties: - "mod" : module clock for the I2S controller - #sound-dai-cells : Must be equal to 0 +Required properties for the following compatibles: + - "allwinner,sun6i-a31-i2s" +- resets: phandle to the reset line for this codec + Example: i2s0: i2s at 01c22400 {
--
2.11.0