[PATCH 1/5] Documentation: dt: iio: document stm32 adc trigger polarity
From: Fabrice Gasnier <hidden>
Date: 2017-01-30 14:11:50
Also in:
linux-devicetree, linux-iio, lkml
Subsystem:
iio subsystem and drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Jonathan Cameron, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
STM32 ADC trigger polarity can be set to either rising, falling or both edges. Allow to configure it from dt. Signed-off-by: Fabrice Gasnier <redacted> --- Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index 5dfc88e..6c6d968 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt@@ -57,6 +57,8 @@ Optional properties: - dmas: Phandle to dma channel for this ADC instance. See ../../dma/dma.txt for details. - dma-names: Must be "rx" when dmas property is being used. +- st,trigger-polarity: Must be 0 (default), 1 or 2 to set default trigger + polarity to respectively "rising-edge", "falling-edge" or "both-edges". Example: adc: adc at 40012000 {
@@ -84,6 +86,7 @@ Example: st,adc-channels = <8>; dmas = <&dma2 0 0 0x400 0x0>; dma-names = "rx"; + st,trigger-polarity = <1>; }; ... other adc child nodes follow...
--
1.9.1