[PATCH v3 1/3] crypto: brcm: DT documentation for Broadcom SPU hardware
From: Rob Rice <hidden>
Date: 2017-01-25 16:45:48
Also in:
linux-crypto, linux-devicetree, lkml
Subsystem:
crypto api, open firmware and flattened device tree bindings, the rest · Maintainers:
Herbert Xu, "David S. Miller", Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Device tree documentation for Broadcom Secure Processing Unit (SPU) crypto hardware. Signed-off-by: Steve Lin <redacted> Signed-off-by: Rob Rice <redacted> --- .../devicetree/bindings/crypto/brcm,spu-crypto.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt
diff --git a/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt b/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt
new file mode 100644
index 0000000..29b6007
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt@@ -0,0 +1,22 @@ +The Broadcom Secure Processing Unit (SPU) hardware supports symmetric +cryptographic offload for Broadcom SoCs. A SoC may have multiple SPU hardware +blocks. + +Required properties: +- compatible: Should be one of the following: + brcm,spum-crypto - for devices with SPU-M hardware + brcm,spu2-crypto - for devices with SPU2 hardware + brcm,spu2-v2-crypto - for devices with enhanced SPU2 hardware features like SHA3 + and Rabin Fingerprint support + brcm,spum-nsp-crypto - for the Northstar Plus variant of the SPU-M hardware + +- reg: Should contain SPU registers location and length. +- mboxes: The mailbox channel to be used to communicate with the SPU. + Mailbox channels correspond to DMA rings on the device. + +Example: + crypto at 612d0000 { + compatible = "brcm,spum-crypto"; + reg = <0 0x612d0000 0 0x900>; + mboxes = <&pdc0 0>; + };
--
2.1.0