Thread (7 messages) 7 messages, 2 authors, 2017-01-25

[PATCH net-next v6 4/4] phy: marvell: Add support for the PHY embedded in the topaz switch

From: andrew@lunn.ch (Andrew Lunn)
Date: 2017-01-24 20:28:53
Also in: lkml, netdev

On Tue, Jan 24, 2017 at 09:10:26PM +0100, Gregory CLEMENT wrote:
The PHY with the ID 0x1410C00
:-(

I don't have a better reference, but
Linux/Documentation/devicetree/bindings/net/phy.txt says:

 22   If the phy's identifier is known then the list may contain an entry
 23   of the form: "ethernet-phy-idAAAA.BBBB" where
 24      AAAA - The value of the 16 bit Phy Identifier 1 register as
 25             4 hex digits. This is the chip vendor OUI bits 3:18
 26      BBBB - The value of the 16 bit Phy Identifier 2 register as
 27             4 hex digits. This is the chip vendor OUI bits 19:24,
 28             followed by 10 bits of a vendor specific ID.

So the lower 10 bits of 0x1410C00 are 0. So we know it is a Marvell
PHY from the OUI, but the vendor specific bits are all 0.

Please take a look at:

https://marc.info/?l=linux-netdev&m=148495522620757&w=1

and

https://marc.info/?l=linux-netdev&m=148495510320714&w=1

Maybe i should submit these two independently, so you can extend it
for the 88E6341 family.

    Andrew
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help