[PATCH v3 04/13] sata: ahci-da850: get the sata clock using a connection id
From: Bartosz Golaszewski <hidden>
Date: 2017-01-18 13:20:28
Also in:
linux-devicetree, linux-ide, lkml
Subsystem:
libata subsystem (serial and parallel ata drivers), the rest · Maintainers:
Damien Le Moal, Niklas Cassel, Linus Torvalds
In preparation for using two clocks in the driver (the sysclk2-based clock and the external REFCLK), check if we got a functional clock after calling ahci_platform_get_resources(). If not, retry calling clk_get() with con_id specified. Signed-off-by: Bartosz Golaszewski <redacted> --- drivers/ata/ahci_da850.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
index 267a3d3..8cfdc86 100644
--- a/drivers/ata/ahci_da850.c
+++ b/drivers/ata/ahci_da850.c@@ -71,12 +71,28 @@ static int ahci_da850_probe(struct platform_device *pdev) struct ahci_host_priv *hpriv; struct resource *res; void __iomem *pwrdn_reg; + struct clk *clk; int rc; hpriv = ahci_platform_get_resources(pdev); if (IS_ERR(hpriv)) return PTR_ERR(hpriv); + /* + * Internally ahci_platform_get_resources() calls clk_get(dev, NULL) + * when trying to obtain the first clock. This SATA controller uses + * two clocks for which we specify two connection ids. If we don't + * have a clock at this point - call clk_get() again with + * con_id = "sata". + */ + if (!hpriv->clks[0]) { + clk = clk_get(dev, "sata"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + hpriv->clks[0] = clk; + } + rc = ahci_platform_enable_resources(hpriv); if (rc) return rc;
--
2.9.3