Thread (17 messages) 17 messages, 4 authors, 2017-03-29

[PATCH 0/4] ARM: exynos: Fix Odroid U3 USB/LAN when TFTP booting (power sequence)

From: krzk@kernel.org (Krzysztof Kozlowski)
Date: 2017-01-09 18:17:16
Also in: linux-devicetree, linux-pm, linux-samsung-soc, lkml

On Mon, Jan 09, 2017 at 11:34:48PM +0530, Anand Moon wrote:
Hi Krzysztof,

On 7 January 2017 at 14:21, Krzysztof Kozlowski [off-list ref] wrote:
quoted
Hi,

Thanks to Markus Reichl, I got an Odroid U3 to work with. Thanks to Peter
Chen, we got a power sequence generic library which solves my long
standing Odroid U3 problem - no LAN9730 if it was enabled by bootloader.

My previous attempts for this can be found here [0].

This patchset is based on Peter's v11 of power sequence [1].
Patchset is available also on my Github [2].

More detailed analysis is described in patch 2/4 ("ARM: dts: exynos: Fix
LAN9730 on Odroid U3 after tftpboot").
[snip]

On which u-boot should this be tested.

On HK u-boot tftp boot is not supported.
... so you gave an answer: you cannot test it on HK. How many other
U-Boot flavors you know? :)

Best regards,
Krzysztof

----------------------------------------------------------
U-Boot 2010.12-00000-g9777ca6-dirty (Nov 26 2015 - 10:10:11) for Exynox4412


CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
APLL = 1000MHz, MPLL = 800MHz
DRAM:  2 GiB

PMIC VERSION : 0x00, CHIP REV : 2
TrustZone Enabled BSP
BL1 version: 20121128


Checking Boot Mode ... SDMMC
MMC Device 0: 14804 MB
MMC Device 1 not found
*** Warning - using default environment

USB3503 NINT = OUTPUT LOW!
ModeKey Check... run normal_boot
No ethernet found.
Hit any key to stop autoboot:  0
Exynos4412 #
Exynos4412 #
Exynos4412 #
Exynos4412 # usb start
(Re)start USB...
USB0:   Exynos4412-ehci: init hccr 12580000 and hcor 12580010 hc_length 16
usb: usb_refclk_enable is active low: NO
ProTIP: If usb doesn't work - try playing with 'usb_invert_clken' environment
USB EHCI 1.00
scanning bus 0 for devices... EHCI timed out on TD - token=0x80008c80
EHCI fail timeout STS_ASS set

      USB device not accepting new address (error=80000000)
EHCI fail timeout STS_ASS set
1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 0 Ethernet Device(s) found
Exynos4412 #

Best Regards
-Anand
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help