Hi Florian,
On mer., janv. 04 2017, Florian Fainelli [off-list ref] wrote:
On 01/03/2017 08:36 AM, Andrew Lunn wrote:
quoted
quoted
+
+ switch: switch at 10 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <16>;
Hummm, a device tree question. switch at 10, reg = <16>. Is there an
implicit understanding that the 10 is hex?
Most (if not all?) unit addresses are hexadecimal, which is why this was
chosen here, but I really don't mind changing that.
And what about using:
reg = <0x10>;
Gregory
--
Florian
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com